DT200WR restoration project pic heavy
-
As suspected not all wires on the new clocks were correct.
New clocks had a blank where the oil light is and a completely fake temperature light..
So I transfer all original loom onto the new clocks and drilled a hole for the temp light and put a long bulb holder in to hold the bulb close to the "red" window
New temp light
Brand new fully functional clocks at a fraction of YAMAHA cost:
-
Looking pucker mate.
Definitely making me itch for another project! Although no way I can afford to do this at the pace you're doing it at!
What ya do, rob a bank?
@Calum cheers Val. And tbh parts I have spent less than £200, powdercoating Inc sandblasting and special paint colour £180
-
@NINJA I'm not sure , I just asked for a semi gloss silver powdercoat
-
@Louis-James said in DT200WR restoration project pic heavy:
@NINJA I'm not sure , I just asked for a semi gloss silver powdercoat
OK Cool I wasn't sure if it was powdercoat or anodising???
@NINJA oh it's all powder
-
Now the rebuild begins.
New chain guard courtesy of AliExpress£11 not bad
Looks so much nicer in person... Really has that 90s yz feel
Contrast
Whacky colour mix
As she sits now... Going to take my time and enjoy it
-
Now the rebuild begins.
New chain guard courtesy of AliExpress£11 not bad
Looks so much nicer in person... Really has that 90s yz feel
Contrast
Whacky colour mix
As she sits now... Going to take my time and enjoy it
-
@Calum probably like Marmite some for people, but I'm daring, it will all make sense when finished.
Thanks, where to? Be good to pull in some newbies
-
@Minia thanks
-
@Louis-James Interesting and unusual colour choice, looks cool and no doubt when completed all the colours will tie together. Is this going to be a show bike or an occasional rider???
@NINJA hi, yes it will be a show bike of sorts but
on sunny days will get a nice ride
Problems with a 25year old bike is not all parts are available anymore,
Thinking of getting an enduro / laner that can be plastered on mud and dropped and banged hha -
@NINJA hi, yes it will be a show bike of sorts but
on sunny days will get a nice ride
Problems with a 25year old bike is not all parts are available anymore,
Thinking of getting an enduro / laner that can be plastered on mud and dropped and banged hha@Louis-James Once restored it will be too good to be thrashed around and in reality using her in that way makes all this effort seem pointless really. You are right get a second bike to be used and abused and leave the restored classics as eye candy!!! :grinning_face_with_smiling_eyes: :winking_face: :grinning_face_with_smiling_eyes:
-
Had a little play this evening.
Whacked on a few bits.
Ordered up a little bracket that was missing what's needed to mount the rad scoops, could have made something but it was £7 new
-
Had a little play this evening.
Whacked on a few bits.
Ordered up a little bracket that was missing what's needed to mount the rad scoops, could have made something but it was £7 new
-
@declan it's the most satif part of a restoration... especially a new colour.. bite the bullet and strip it down
-
Starting to look like a motorbike again. Just perfecting any little bits along the way.
