tubeless rims
-
im riding from thurrock to bishop stalford so it county lanes and towns im running michelin heavy duty innertubes 4mm i think and sirac tyres at about 28psi and had three punchers so far at it now grating on me waiting for the recovery van never had problems before i started doing this journey and they new tyres and tubes as well could just be bad luck put thought tubless tyres have got to be better as could plug them to get me home
-
I used some of that anti puncture fluid on my old Suzuki - you have to take the valve out then fill the tube, valve back in and inflate. I don't think either tyre ever lost air between then and selling it
This isn't what I used but it's similar.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F133033492866 -
@finnerz89 yes i did buy some slime yesterday and added to the new tubes and tyres so got finger crossed that it helps out
-
@britshgigolo let's hope so
-
-
@britshgigolo Slime is a PoS and totally useless as are most so called puncture repair sealants. However I have tried this stuff and never had a puncture, but then that could all be down to luck???
-
I can confirm with slime my dad was a dealer of the stuff and it works a treat itβs always worked for me bike, car motorbike whatever it is it works he has a scooter tire off a Suzuki he used for demonstration had it years had so many holes pocked in it and itβs never gone down still up to this day
-
well all i can do is try this till i find some rims that will except tubless tyres not having much luck at the moment contacted a couple of shops but they say they dont know of any rims for a dtr so the search continues but thanks for all the information good or bad can only but try till i find a soloution many thanks neil
-
@britshgigolo run a mouse if you don't mind the tyres fairly soft and replacement every year or so
-
@britshgigolo Surely if you reuse the stock hubs, any rims can be laced onto those - within reason???
-
@Glynn123 said in tubeless rims:
rim bands
i thought the rims were not suitable for tubless because the sides are not deep enough to hold the tubless tyre thought there was a diffrence in rims between the two
-
@Calum hi mate what rims am i looking for as spoke with a couple of mx shops and they say there cant be done but im sure i had read on here of people lacing rims to dt hubs or is it better to just get diffrent wheel any help would be greatfull