DT125R stator on DT125RE

[Calum]

@Bananper unfortunately not, due to the R having different electrics.

What makes you feel like the stator is faulty? They are pretty reliable, since it's just a winding... Could it not be the rectifier?

[declan]

@Bananper yeah they don’t fit been there done that China does a good looking system for cheap I was going to get one

[markus.w]

@Bananper hi mate, not sure what part of the world you're in but there's a company in UK called west country windings who rebuilt my stator off my old gsx 250 for a very reasonable price and all by mail. You can mail it to them and I had mine returned within about 3 days. I think it cost me about £20 but it was about 15 years ago. They are online. Maybe worth a try.

[Bananper]

@Calum well my bike has a no spark issue and as i said in my other post, the source coil showed a lower reading than the specifications in the haynes manual. 125 ohms, should have been 192-288. I already replaved my rectifier.

[Bananper]

@Calum do you think that the source coil could be my issue?

[Calum]

I would be reluctant to think so. It's just a coil of wire. Perhaps the pickup. But the coils? I dunno, I've not heard them going wrong through age.

Put it this way, a lot of this stuff still works on Lambrettas and they weren't theb est built to begin with and are like a million years old.

[Bananper]

@Calum I got a friend of mine to take of his left side cover with the coils in and everything, put it on mine and it sparked!
So i'm looking at what options i got when it comes to getting a new one, as paying 100£+ for one on ebay is too much in my opinion. Any suggestions, are there any aftermarket stators?

[Calum]

You can get yours rewound by a specialist.

[Bananper]

@declan said in DT125R stator on DT125RE:

@Bananper yeah they don’t fit been there done that China does a good looking system for cheap I was going to get one

Could you link it to me?

[declan]

@Bananper https://www.google.com/aclk?sa=l&ai=DChcSEwi45PSV1MXoAhWFhtUKHZbUD60YABAGGgJ3cw&sig=AOD64_1izRmI2DOHXKWLhyNqlkblXiXRzQ&ctype=5&q=&ved=0ahUKEwj3zPCV1MXoAhWQFcAKHUJECeIQpysIJA&adurl=

obviously do your own research into if it will work but looks identical to my one i changed

[Bananper]

@declan Looks like it only fits the old DTR

[Bananper]

@Calum Do you know if a TZR stator would fit, isn't it exactly the same engine as the DTRE? They are a lot more common to find on ebay.

[declan]

@Bananper my bad I misread your original post I thought you had a dtr

[Calum]

@Bananper I would know i'm afraid.

The TZR Belgarda uses a 3MB Engine. I can't remember if I used the coils from that engine on my loom. I would have thought so. But I don't know about the 2RK models. The Belgarda engines should be somewhat scarce.