Derestrict yamaha dt 125 r 1997
-
Hello.
I just bought myself a new Yamaha dt 125 r, and i want to derestrict it. But when i looked at the derestriction guide and then at my bike, the cdi wire colors were different. And I've been searching for a other guide to derestrict it but there is none.
When I'm in the last gear the bike won't go over 80 km/h. If it goes i can hear the spark plug not getting spark and getting spark when its back at 80 km/h.
If anyone could help me, it would be appreciated. -
Hello.
I just bought myself a new Yamaha dt 125 r, and i want to derestrict it. But when i looked at the derestriction guide and then at my bike, the cdi wire colors were different. And I've been searching for a other guide to derestrict it but there is none.
When I'm in the last gear the bike won't go over 80 km/h. If it goes i can hear the spark plug not getting spark and getting spark when its back at 80 km/h.
If anyone could help me, it would be appreciated. -
-
@Mr-Shadi the 1997 doesn't have the reed switch. It has a restricted CDI. Maybe change it for the older 3nc CDI. But you should be getting a lot more than 80kmh. Something else isn't right for sure.
@markus-w i can hear the spark plug not getting spark when it goes above 80 km/h. But it takes a a little while for it to start not getting spark (3 to 7 seconds). And when i disconnected one of three cdi wire connectors and went on the road to try again. The restrictor sound was different and started right after 80km/h with no delay, unlike if the connector was connected.
-
Hello.
I just bought myself a new Yamaha dt 125 r, and i want to derestrict it. But when i looked at the derestriction guide and then at my bike, the cdi wire colors were different. And I've been searching for a other guide to derestrict it but there is none.
When I'm in the last gear the bike won't go over 80 km/h. If it goes i can hear the spark plug not getting spark and getting spark when its back at 80 km/h.
If anyone could help me, it would be appreciated.@Mr-Shadi some pics
https://postimg.cc/14GSvH2d cdi
https://postimg.cc/KK3SBrtJ colors
https://postimg.cc/5Ycc3Y31 colors
https://postimg.cc/r05BYVn4 3 cdi wire connectors and 1 other
https://postimg.cc/5Q3ZbPMN voltage regulator -
@Mr-Shadi some pics
https://postimg.cc/14GSvH2d cdi
https://postimg.cc/KK3SBrtJ colors
https://postimg.cc/5Ycc3Y31 colors
https://postimg.cc/r05BYVn4 3 cdi wire connectors and 1 other
https://postimg.cc/5Q3ZbPMN voltage regulator -
@forum members
Isn’t there a later model that needs a CDI wire cutting & earthing somewhere? Or is that a Tzr?…I’m sorry Mr-Shadi, I don’t know too much about later than 1995 model dtr125’s, other than what I have read. What country is your bike from? I’m guessing that english isn’t your first language?
I’ll do a bit of reading and try to find out about 1997 bikes…Edit: 4dl Germany! Got it!
-
@forum members
Isn’t there a later model that needs a CDI wire cutting & earthing somewhere? Or is that a Tzr?…I’m sorry Mr-Shadi, I don’t know too much about later than 1995 model dtr125’s, other than what I have read. What country is your bike from? I’m guessing that english isn’t your first language?
I’ll do a bit of reading and try to find out about 1997 bikes…Edit: 4dl Germany! Got it!
-
The DTRE has a green and black wire, once earthed that's all the electrical restrictions and then the bike revs off the clocks.
-
I’m worried that he might have the one with the ‘silver box behind the 2T oil tank’ that needs loads of faffing about! I tried getting scrims guide up but kept getting a 401 error!…
@SpookDog 401? That's
UnauthorizedRight, yeah I don't know about that one. I only really researched the one for my bike.
Best thing to do is get a Zeeltronic ignition system for it and you're laughing.
Always Originate, Never Pirate!
-
@SpookDog 401? That's
UnauthorizedRight, yeah I don't know about that one. I only really researched the one for my bike.
Best thing to do is get a Zeeltronic ignition system for it and you're laughing.
-
I’m worried that he might have the one with the ‘silver box behind the 2T oil tank’ that needs loads of faffing about! I tried getting scrims guide up but kept getting a 401 error!…
-
On a copy (of scrims) on another site it said to install an earlier CDI I think? Yamaha certainly had it in in for you lads with later bikes! Access Forbidden!
SNAFU! 
️ …My bad! It was 404 not quite as verboten!
… -
@SpookDog scrims sites hosting server has stopped broadcasting the info. But there is a slideshare link on the forum that has the site in slide form
this one
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login