led indicators
-
Ty hope it helps other having the same problems with LED indicators on there DTs or any bike/car with the single turn indicator dash bulb.
-
@britshgigolo Good job man, thanks for sharing!!!
-
Nice one bud, this one gets asked time and time again.
-
Can I use LED indicators with a trail tech vapour? I don’t run any indicators at the min but I’m sure I need them for MOT
-
@ricky0115 You do not need them for the MOT, so long as you do have a switch.
-
MOT testers are totally unpredictable when it comes to this. I've been to places that claim you don't need indicators as long as your switch for them is taped up, however I've been to others that say you either run ALL lights working, or remove them completely.
Best idea is to phone up your tester and ask them if they're able to pass your bike without indicators.
-
Top post, enjoyed following that, good job done.
-
@oldman thank you i have changed the head light bulb to a led h4 philips lumiled as well but not tryed it in the dark so dont know what the rusults will be had to use the old bulb base to fit into the light as they diffrent to standard h4 bulb but with a dremel was easy to do
-
I have a H4 led aswell, you can buy adaptors on ebay ect to make them fit, so I took the easy route on that one. Love it at night compared to stock. I have led al the way around, but no blinkers installed.
-
You do not need any specific diode, just enter 1A schottky diode, chosse a reasonable voltage and take the cheapest (3A etc. is also fine).To make the build more compact you can also use any other ground source eg from the high beam indicator:
My setup:
