Zeeltronic
-
@Calum I'm guessing he's using the dt setup
-
@Calum I'm guessing he's using the dt setup
@andrewj1680 it's different because my looming, PV servo and stator is the standard Dt125r, but with a wr200 top end and crank. They probably could make one, as mine was the first for my year of Dt125r
-
The thing is there is a market for the dt unit where as the wr isn't as common so at a guess no benefit to them making a single unit
-
The thing is there is a market for the dt unit where as the wr isn't as common so at a guess no benefit to them making a single unit
@andrewj1680 Is there really much gain from a Zeeltronic on the wr, since this was a competition motor.
-
I don't know to be fair the bike seemed to go well but zeeltronic could possibly take it a step further
-
@andrewj1680 Is there really much gain from a Zeeltronic on the wr, since this was a competition motor.
-
I don't know to be fair the bike seemed to go well but zeeltronic could possibly take it a step further
@andrewj1680 Are they not able to make you a custom map at all???
-
@Calum Probably a fair bit, still a very sedate design
@andrewj1680 You could probably get a good enough tune using the DT zeel tho,
The WR could do with a little more ignition advance,
@Darty I was thinking swap all the electrics for the dt and run a late loom as I can keep the battery too then otherwise it means running the wr200 loom with the power cap
-
@Darty I was thinking swap all the electrics for the dt and run a late loom as I can keep the battery too then otherwise it means running the wr200 loom with the power cap
@andrewj1680 Not a bad idea, should work fine