DT125R FORUM

Yeah, this was linked a while back on a tdr250 where the engine seized because of the play!

OK so it's not the power valve making the noise... Has anyone ever had a noise coming from the small end bearing? If so any videos of the noise?

@Jgb19830 i think you should get one from a dt125x i have a supermoto converted dt125re and the speedo shows around 15-20kmh over what you are going. though my speedo doesnt work anymore since the wire broke and i cant be arsed to buy a new wire

On DTX SM rims I run 120 front and 150 rear Conti Attack SM tyres, you don't really wanna go much wider than them on standard rims as the profile is pretty agressive, takes alot of lean to get full use of the curve but they feel very good on tight mountain roads.

@Glynn123 was looking at other options like ktm duke wheels but got these for £100 plus I like the look of them. Was thinking of fitting the front with a 110 wide tyre and the rear with 140 but I'll see how it goes.

@dan28
Just thinking don't just cut straight through the whole thing as the baffle tube inside needs to be an inch or two longer to fit into the end cap of I remember correct

https://youtu.be/p5XOQFRJzko
Here it is running...

Story is it overheated on a ride out due to an airlock in the cooling system. So the piston went pop

so @Jgb19830 did you fixed it,just by that? i have the same problem.