-
@darty said in Frames tanks swinging arms forks etc:
Can you do any metal work on the tanks? I'm thinking of dents and rust treatment.
Yes
-
@scrimsmustang do you have a rough quote?
@declan said in Frames tanks swinging arms forks etc:
@scrimsmustang do you have a rough quote?
To do what jobs
-
-
Hi all, if anyone wants frames tanks swinging arms etc blasting and painting properly i can do them over the winter if you can get them to me. I have the paint code for the DPBM tanks. I have the blaster and paint booth and a bit of time to do it. Its a far better gloss finish on frames than powdercoat. I use 2k on solid colours and basecoat with 2k clearcoat on swinging arms forks etc.
-
@scrimsmustang What about swing arm polishing? Are you able to offer that service as well dude???
-
@ninja What you mean Ally polishing,
There is a companyt in Oxfortd that do it.
Around the £80 mark. I was going to get mine done.
-
-
I can blast 2k primer and 2K top coat frame, rear footpeg hangers, rear subframe and rear rack for £275 for solid colours like white black red etc £325 for DPBM on an RE frame.
I can blast primer basecoat and 2K lacquer swinging arm and dogbones etc, and refinish the forks including sorting out any gouges in them for £125
Tanks I can do for £50 if you bare metal them yourself £70 if you want me to bare metal them. Also the DPBM paint is more expensive because its base and lacquer.
-
I can blast 2k primer and 2K top coat frame, rear footpeg hangers, rear subframe and rear rack for £275 for solid colours like white black red etc £325 for DPBM on an RE frame.
I can blast primer basecoat and 2K lacquer swinging arm and dogbones etc, and refinish the forks including sorting out any gouges in them for £125
Tanks I can do for £50 if you bare metal them yourself £70 if you want me to bare metal them. Also the DPBM paint is more expensive because its base and lacquer.
@scrimsmustang Just to ad, if anyone does want a frame doing if you have any snapped bolts in the rear were they usually snap get your cobalt drill bits out and drillem out first.
