The Leviathan Project

[Calum]

Well this was probably one of the last big expenses needed on the DT.

The front Disc.

I have wanted this for ages, but put it off due to the cost. Well it was my Bday a couple of weeks ago so this was a present from my Dad. Cheers dad.

There is literally not much left on this to do now!

[Mightyman]

Looks like you'll be having a new display picture in no time Calum!

[Calum]

@MIGHTYMAN I wish. There is still lots and lots to do yet!

But the main shell is now there.

[Biker_123]

That front disc is insane!! Looking amazing hope you keep that bike locked up well at night @calum lol as its bound to catch people's attention when you start using it when it's finished.

[Calum]

@Biker_123 Cheers dude.

So my Garage is actually inside the house... So it's one of those things. We have dogs that sleep next to garage door as well.

It's not so much Inside I am worried about as it is so much out and about!

Also if anyone has seen my CarPc project then you know how awesome it is.

I am in the talks with a mate to create one for the DT.

I am thinking possibly MP3 player, Sat Nav and integrated GoPro on the bike.

The idea would be to use a new piece of Hardware, called the Raspberry Pi Zero. It's £5 computer that's pretty well spec'd.

It's all just talks at the moment. But a Raspberry Pi, 3.5" touch screen and the Sony 8Mp 1080P camera mounted on the bike. At the touch of a button you could record video.

My issue at the moment is how would I make this waterproof.

But should be an interesting project.

[Biker_123]

@Calum that sounds brilliant would you just power the small comp of the bikes battery?? This sounds like the ultimate mod will be interesting to see how this actually works on the bike

[Calum]

@Biker_123 I am thinking you will need to trickle charge a UPS that will power the pi.

Then I reckon use a handle bar mount to mount the screen in the center of your handlebars. I've done away with the airbox, so making that watertight, and hiding the Pi in there might be the way to go.

Because it's a Pi, you can feed it all kinds of sensors, Engine Temp, Exhaust Temp, RPM's, Speedo....And show it all on the screen.

Again I have some ideas floating about. I just need to put them together.

The hardest bit will be making it watertight. If I can do that, then it's a goer.

[Mightyman]

That's an awsome idea. Like a totally custom speedo / dash clocks...!

[Calum]

@MIGHTYMAN I was thinking this also.

Could even get the speed from Satelite navigation.

I do like the Vapor unit though lol.

But the possibilities are only limited by your imagination!

When I start building it I shall open up another thread. In case anyone else is interested.

[aidan1996]

@Calum when will it be running will there be a video haha

[aidan1996]

@Calum https://www.youtube.com/watch?v=M0PbeINVUMw

[NINJA]

@aidan1996 WTF has he done to that bike to get it up to nearly 1700RPM???

[Calum]

@CYBER-NINJA It reving to that rpm and it making any power at all are two completely different things. My CDI allows sparking up to 22'000. But it woild make less power there than it would at 5.

[Calum]

Snail trail pace, but it's getting there!

This piece I had to make up as the radiator swap meant these had to be cabled tied togeteher in one piece.

[gareth_iowc]

@Calum i'm also attempting to put the yz125 forks on my dt125r.

would you be interested in making another bearing cup for the top bearing that i could buy from you?

[Zrako]

@Mightyman I've got the similar ones , Zeta makes them. Looks cool mate

[NINJA]

@Calum Looks neat bud.

[finnerz89]

Sorry to refer back to the start of the thread, but, have you still got the how-to for the kickstart mod? And does it replace the electric start or can you keep both?

[Calum]

@finnerz89 Keep both. The tutorial is on here bud try searching for it.

[finnerz89]

@Calum Cheers mate