Swingarm
-
On both my 1988 dts they have grease nipples on the swingarm, just changing the bearings on another and no grease nipples?. Were they omitted from later bikes?
-
On the underside with the linkages? They are on my 2005 DTRE. But none on the swingarm itself
-
Can some post a picture of it up?
I don't know what you're on about? -
Ah yes okay. Yeah that's pretty useful.
-
On my 2003 dt there a 3 grease nipples, 1 on swinging arm and 2
on the linkage bolts. -
some people add those grease nipples
-
@declan
I would of done if I’d had any decent taps when I was rebuilding my swing arm. Mines an 88 (allegedly things change with 15 registered previous owners) and I don’t have any fitted. It’s a pretty shitty cost save IMO. The bearings were rusty when I stripped it down. Being able to top up the grease would of extended the seals life, which would of prevented water getting into the needle bearings...
False economy @ the buyers expense! The nipples are pennies and drilling and tapping 2 holes can’t be that expensive!... -
I can't see it being a cost thing.
My DTR's swingarm bearings were fine. And besides the point, it's not a big job to pull the swingarm bolt and regrease.
1/13