TDR125 4GW
-
@Mightyman Right, I was thinking this myself...
-
@Mightyman Shiney steel - all polished up then!!!
-
@Zrako calum's method works great. i've got some close up pictures so you can see how it works
https://dt125r.co.uk/topic/595/project-i-can-t-leave-things-alone
i used a stock dtr lower bearing in the frame with the yz forks and the stock yz top bearing sat in the new bearing cup
@gareth_iowc awesome mate , defo will do the cup. What material did you used?
Btw what you planning to do with the other yz engine?
-
@Zrako the guy made it out of alloy
The 1lx is up for sale
-
@gareth_iowc I was wondering if alloy is good.
@Zrako It's going to be softer than steel, the head stock can take a battering as well, it's under some levels of force. But I'd imagine it would be fine. After all the aprilia is an Alloy Frame/Headstock.
So it should be up to the task fine.
Always Originate, Never Pirate!
-
@Zrako It's going to be softer than steel, the head stock can take a battering as well, it's under some levels of force. But I'd imagine it would be fine. After all the aprilia is an Alloy Frame/Headstock.
So it should be up to the task fine.
-
This post is deleted!
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login