Foot pegs

[Calum]

@declan Slant?

Just grind them down so they fit properly.

[declan]

@calum no it's the opposite like there's ever so slightly pointing down they work but I'm scared if I hear really wet my feet may slip on jumps

[NINJA]

@declan Are yours knackered, or are you just wanting some wider ones dude? I just sprayed mine up and they looked as good as new!!!

[declan]

@cyber-ninja wanted some that would be a better fit and I was hoping for second hand so I can get them cheap then paint em up

[NINJA]

@declan As cheap as chips, so long as you don't mind the wait;

https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2060353.m570.l1313.TR0.TRC0.H0.Xtw200+foot+pegs.TRS0&_nkw=tw200+foot+pegs&_sacat=0

They even come with new springs and pins;

http://www.ebay.co.uk/itm/Foot-Pegs-Rest-Black-For-Yamaha-TTR90-TTR90E-CRF80-PW80-PW50-Pit-Dirt-Motor-Bike-/122653858300?hash=item1c8ebd59fc:g:RSAAAOSwN2VZQu-3

[Jens Eskildsen]

Get the steel ones please, the others is made from 100%pure chinesium.

This design is much more sturdy: http://www.ebay.com/itm/Steel-Foot-Pegs-For-Yamaha-PW-50-PW-80-TW-200-/310450858598?hash=item4848502a66:g:uUIAAOSw0UNZdwsd&vxp=mtr

[Calum]

Those apico ones I bought are ally and are well tough.

[declan]

@calum yeah they're built like a tank lol

[declan]

@jens-eskildsen only issue I have lads is these cheap ones look identical to the type that I have on the dt and like I say they are slightly slanted downwards I can get cheap pegs I'm just trying to make sure that they will fit and not slant down

[Jens Eskildsen]

Mine are perfectly fine.

[andrewj1680]

I've ordered a set of these the pivot back or forward too

[declan]

@andrewj1680 wow just came here to show off haven't you How much were those!

[andrewj1680]

They were a tad expensive but its 1 of them things you only buy once aint it

[declan]

@andrewj1680 yeah I guess it is

[NINJA]

@andrewj1680 Share a link please.

[Zrako]

@calum what are they originally for please? Did you had to modify it or direct fit?

[Calum]

@zrako No idea mate sorry. Really couldn't tell you.

They fitted fine, but needed the backs ground down to just bring the angle down. I used a work bench grinder, but the same effect could be done with an angle grinder, or a file.

[Zrako]

@calum yeah small modifications are not problem . Could it be from cr85 for example?

[Calum]

@zrako Jeez! I bought them so long ago took me ages to find the receipts.

Nah man, apparently I bought just universal ones.

[declan]

@calum if you had said I could of saved you the time lol yeah they aren't for any specific bike