2003 Yamaha Dt125R Project
-
Looks very well I like it
-
Cheers guys! Its been a long time coming, most of the time it took me to rebuild it was waiting for parts from MSP but least i know the engine is 100% good to go, just need to get the rest of the bike going now.
-
Hiya again folks
So i have some good news i have started at a garage as a welder / fabricator repairing rotten sills on vans, cars, buses etc....
My boss is kind enough to let me redo and weld new nuts and other work to all my parts before he sends it all off for powder coating, i have one question regarding the suspention linkage and bushes etc... I dont want to pay £355 for genuine yamah bearings and oil seals etc... so i want to know what size bearings i can get as a replacment instead of the standard roller bearings i wanna use ball bearings instead anyone know what size bearings i will need?
-
I managed to get branded roller swingarm bearings for about half the price of Yamaha ones, the bearing code will be on the side of the old bearings if you still have them.
-
@DTR-NSR i dont have them no more there was nawt left of them anychance you may have old ones laying around to get numbers off?
-
@Walney-Reptiles you need linkage stuff or swing arm stuff?
-
Also can someone link me to the upgrade bearings for the headset on the 2002 yamaha dtr?
-
@Walney-Reptiles There are upgradable bearings?
-
@Calum well i say that what i mean is you can change the top bearing to taper bearings instead of the standard ring bearing
-
@Walney-Reptiles Not without changing the the yokes/bearing cup.
I done it cause I fitted USDs. But otherwise, no. Or I'm sure it could be done, but what would be the point?
-
-
Well i have made some more orders list below
Head race bearings
Linkage bearings and bushes
Rear swing arm bearings
Frunt wheel and Rear wheel bearings
in total £186.59Heres a list with everythink i have bought since i started the project back in july including the above..
Athena 125cc cylinderhead kit £429.95
All bearings in engine (SimplyBearings.co.uk) one from pjme £128.09
All bearings on frame and wheels (coming from ebay.co.uk) £186.59
Athena full oilseals (from ebay.co.uk) £33.95
Athena Full gasket set (from ebay.co.uk) £29.99
MSP (replacment bits for inside engine that i lost) £45.48
Sub Total £854.05 SO FARI estimate there will be atleast £600-£700 more ontop left to be spent before it is complete
-
-
@Calum I agree there mate, I will be getting a new carb ANY advice on carbs? im not after the cheapest one or the most expensive one also i will be getting one of them zeeltronic CDI's for my bike but id like to know if anyone on here has set one up? currently i have the 3RM-20 cdi units would the zeeltronic CDI replace that? i also use the PV System.
-
So i have Just ordered some more bits...
Yamaha WR125X Radiator With 12v fan (Im going to fabricate my own mounts for this so dont worry if you think it wont fit ordered this because my DTR one is Crap and the wr one was only £32 with free postage)
Also ordered
a second Rad fan witch was £18
DT125R Stainless Engine mounting allen bolts
Just an extra note im going to cut the elbow off the bottom of the radiator and spin it to point the correct way
-
Well i have had some Post Today
Swingarm bearings and bushes and seals aka service kit
Linkage bearings and bushes and seals aka service kit
Head race Taper bearings top and bottom
-
@Walney-Reptiles where’d you get the linkage kit from pal?
