Recommended reeds?
-
@Calum Theory is one thing, it's about context more so. How do we practically apply theory with the ownership of a DT125R? It requires it's own logic.
The knowledge of tuning, I've found is detrimental in most cases to this engine, because of it's design, the inlet tract length and Airbox still amaze me with the efficiency of it.
It's hard to prove it's improved?
It's an interesting point about our opinions. Practical experience is what we are here to explore.
Debating theory is mere conjecture, and there is nothing wrong with that.
After 4 years, I've yet to decide if I have really bettered the original version I started with
Good to see the forum growing , one love to all!
@Darty I wondered this mate. When I got my dt some 7 years ago I remember it being much quicker than it is now lol.
But having ridden a bog standard one, I realise now that it is a lot quicker, but still slow.
I mean really bad on fuel. I get about 100 miles to a tank of fuel. That would be a mix of thrashing it and taking it steady. That's pretty good hoing for a smoker.
Always Originate, Never Pirate!
-
@Darty I wondered this mate. When I got my dt some 7 years ago I remember it being much quicker than it is now lol.
But having ridden a bog standard one, I realise now that it is a lot quicker, but still slow.
I mean really bad on fuel. I get about 100 miles to a tank of fuel. That would be a mix of thrashing it and taking it steady. That's pretty good hoing for a smoker.
-
@Calum well I'm hooked on my dt I was not expecting it to have that much power and speed but not only that but how smooth the gearbox is and how comfy the bike is I love it already.
-
@Mightyman Aprilia box is hella notchy lmao.
DT is like a rifle action by comparison.
-
Thought I would write an update from my previous post ^
It seems as though the 40km that was dropped from my tank must have been something of a 'bedding in' stage for these carbon fibre reeds, as I am getting normal fuel consumption again after cycling through another 5 - 10 tanks.
-
@Calum sorry lads quick side questing connected my autolube up and ran the bike but no oil coming out do I need to bleed it or what?
@declan yes you need to bleed the autolube mate. When Im rebuilt my engine , I ran on few litres of premix to bleed my pump. There is a rubber blind pipe with small clamp on . Let the bike idling and manually twist the pump pull-wheel with the small pipe off , I have transparent pipes so Im seen when it start coming to the inlet. Might not be best method but worked for me ...
1979 Jawa Mustang 50
2003 Gilera DNA 125 R.I.P
2015 Keeway TX 125 SM
2006 Yamaha DT 125 X -
@declan yes you need to bleed the autolube mate. When Im rebuilt my engine , I ran on few litres of premix to bleed my pump. There is a rubber blind pipe with small clamp on . Let the bike idling and manually twist the pump pull-wheel with the small pipe off , I have transparent pipes so Im seen when it start coming to the inlet. Might not be best method but worked for me ...
-
@Zrako appreciate it I did the same as you only with no bleed valve I'll give it a go thank you.
-
@declan Once it's bled through that blind system then put the nipple back on and just ride the bike.
Obviously run the bike with premix initially to just ensure you have oil in the engine.
-
@Calum it's working now bud thanks can you get v force reeds for the dt I just whooped some guys ass in a race but he said get some v force reeds and re jet
-
@Calum it's working now bud thanks can you get v force reeds for the dt I just whooped some guys ass in a race but he said get some v force reeds and re jet
@declan Lol. V Force Reeds.
It's more the V Force Reed block that you should be concerned with, and no you cannot.
Shouldn't worry though it's not going to drastically change performance. So long as you have some carbon reeds or plastic then that'll suffice.
Always Originate, Never Pirate!
-
@declan Lol. V Force Reeds.
It's more the V Force Reed block that you should be concerned with, and no you cannot.
Shouldn't worry though it's not going to drastically change performance. So long as you have some carbon reeds or plastic then that'll suffice.
-
@declan No? I was just saying I am pretty sure it's the cage you want not the reeds as I think the stock ang or carbonreeds are about as good as you can get. So don't waste your money.
-
@Calum I'm kidding, I'm new to 2 stroke so I thought v force also did reeds but I've salvaged mine if flipped them and Gonma repair the inlet rubber and need to clean the carb after that hopefully she goes good
you mocking me m9?