Anyone mounted fmf on Dtx?
-
@irongamer727 I’m sure if you take both the fmf and your current system to either a metal works welding shop or a custom exhaust shop who make exhaust from scratch they will work something out but is it really worth it after all that? You could just get a shorty dep with an fmf sticker
-
@declan said in Anyone mounted fmf on Dtx?:
Wr200fmf is a direct bolt up all I did was mount it on the rear on the grab handle rather that the original exhaust mount
-
@andrewj1680 Front pipe just bolts on, like DT200R standard onto 125 different part numbers same exhaust no restrictions.
-
@scrimsmustang my fmf came with a adapter plate that bolts straight to the head and then the front pipe slots over the top and then 2 springs to hols it together the same as you do on the crossers
-
@andrewj1680 mine has the same thing but I got a big one
-
@declan said in Anyone mounted fmf on Dtx?:
@andrewj1680 mine has the same thing but I got a big one
Stop bragging dude!!!
-
@andrewj1680 said in Anyone mounted fmf on Dtx?:
@scrimsmustang my fmf came with a adapter plate that bolts straight to the head and then the front pipe slots over the top and then 2 springs to hols it together the same as you do on the crossers
Yeah they do So Cal dude !
-
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F331387246138
Should fit with some mod right?
Tired of listening to my Arrow pipe which sound exactly like the stock pipe... -
My only concern is that the pipe itself is to short..
-
-
@calum the really nice tapping noises from the dep pipes and almost every other depends on the thickness of the pipe right? And the silencer?
-
@irongamer727 To be honest, I would be lying if I said I knew anything about exhausts.
