Clear Carb Warming Hoses

[Bentley]

Anyone got a link where to buy them?

[finnerz89]

http://yambits.co.uk/dt125x-clear-oil-line-kit-p-42285.html

[Bentley]

@finnerz89 thanks mate!

[Mightyman]

Finally got a picture with the coolant inside the loop!

[NINJA]

@Mightyman OOOHHH that rust sure needs sorting dude, takes the edge off them pukka coolant pipes for-sure!!!

[Mightyman]

@CYBER-NINJA aha yeah.. one day I'll pull it apart and spray the frame.. but the majority of the bike is either rusty, dirty or broken(plastics) so not really worth the time.

[Zrako]

Rust remedy and spray it with some protective paint . Will do for some time . Dont like patching but it should stop rust biting your precious bike

[Jens Eskildsen]

So, i bought some clear pipe, and installed it on the oil feed line, so a bit of bling, and a bit more pink for the bike aswell

Theres not much flow in the carb-warming pipes, i see some air in there, so I guess I need to bleed them a bit more, and see if that will help.

Then raced it at a small mx track:

[Calum]

@Jens-Eskildsen looking lovely mate!

[Mightyman]

@Jens-Eskildsen mine had air for the first couple minutes of running before it bled itself up.

[rogering]

What mm is the carb cooling tubes ? I see the 2t oil is 3mm thanks in advance

[Mightyman]

6mm for these carb coolant pipes.