The Leviathan Project
-
@MIGHTYMAN I was thinking this also.
Could even get the speed from Satelite navigation.
I do like the Vapor unit though lol.
But the possibilities are only limited by your imagination!
When I start building it I shall open up another thread. In case anyone else is interested.
-
-
@aidan1996 WTF has he done to that bike to get it up to nearly 1700RPM???
-
-
@Calum i'm also attempting to put the yz125 forks on my dt125r.
would you be interested in making another bearing cup for the top bearing that i could buy from you?
-
@Mightyman I've got the similar ones , Zeta makes them. Looks cool mate
-
Sorry to refer back to the start of the thread, but, have you still got the how-to for the kickstart mod? And does it replace the electric start or can you keep both?
-
@finnerz89 Keep both. The tutorial is on here bud try searching for it.
-
@Calum did you see my post about the bearing cup?
-
@gareth_iowc Yeah I did write a reply. Must have forgot to send it.
Basically it's not as simple as: grab a YZ that'll do
There is a bit more to it. Diagrams have to be made, measurements have to be made and having the physical item to hand always helps.
I also no longer have access to the lathe I used last time. I need to rewire the current lathe I have got.
So no I can't I'm afraid. I've written full guidance on how it can be done.
If I had a working lathe then it's possible. But it took me a fair few hours last time due to the inferior tools. An engineering firm should be able to CnC it in minutes if you draw up a diagram for them.
-
Ok man thanks.
I've got a guy in mind but I thought you might be with a try as you've done one before
-
@gareth_iowc I wrote a guide on the basic theory. Follow that and you can't go too far.
-
Two long years
-
Shit hot when ours should have a stand together at a show