The Helios Project (Aprilia RS 125 Rotax 122 Biaggi Race Replica)
-
So it's the start of the month again....I guess I better throw all my money away and live on baked beans for the rest of the month....
Some very bland, boring OEM spares. All genuine.
A gorgeous TYGA Pipe Stainless Steel with Carbon end can. These guys made all my carbon fibre parts plus my rearsets. So I very much rate them!
And because you were all complaining about my anemic bike, I've wheeled her outside for some photos.
And before anyone complains, yes, the photos have been touched up a little to make them look a little better. My camera is so poo it just doesn't do the bike any justice. So contrast and brightness have been notched and the saturation up'd slightly. But for comparison, here is a photo of the bike without any filters on.
The rest of the photos have been touched up to remove the block of wood and any imperfections.
My camera then overheated and died lol. Luckily it came back to life so I could retrieve the images. Not going to lie, even just the push from the garage to the garden had me sweating like crazy #SoUnfit!
Some more bits have literally just arrived, but I will probably get to them tomorrow.
Started work on the Hydraulic clutch as well now. Got the photos of that on my W810i Sony Walkman phone...you can tell where all my money has gone. I don't know how well the photos will come out on that. Hopefully be decent enough for people to follow. It's coming together nicely. Finished off the machining to the adapter plate last night. Just need to modify the clutch cover to take the slave cylinder. @NINJA watch this space for how to do it. I will put up a tutorial. The way the other guy done it wouldn't have lasted.
Always Originate, Never Pirate!
-
So it's the start of the month again....I guess I better throw all my money away and live on baked beans for the rest of the month....
Some very bland, boring OEM spares. All genuine.
A gorgeous TYGA Pipe Stainless Steel with Carbon end can. These guys made all my carbon fibre parts plus my rearsets. So I very much rate them!
And because you were all complaining about my anemic bike, I've wheeled her outside for some photos.
And before anyone complains, yes, the photos have been touched up a little to make them look a little better. My camera is so poo it just doesn't do the bike any justice. So contrast and brightness have been notched and the saturation up'd slightly. But for comparison, here is a photo of the bike without any filters on.
The rest of the photos have been touched up to remove the block of wood and any imperfections.
My camera then overheated and died lol. Luckily it came back to life so I could retrieve the images. Not going to lie, even just the push from the garage to the garden had me sweating like crazy #SoUnfit!
Some more bits have literally just arrived, but I will probably get to them tomorrow.
Started work on the Hydraulic clutch as well now. Got the photos of that on my W810i Sony Walkman phone...you can tell where all my money has gone. I don't know how well the photos will come out on that. Hopefully be decent enough for people to follow. It's coming together nicely. Finished off the machining to the adapter plate last night. Just need to modify the clutch cover to take the slave cylinder. @NINJA watch this space for how to do it. I will put up a tutorial. The way the other guy done it wouldn't have lasted.
-
@calum it’s beautiful and stop complaining your English we have baked beans running through our veins
and I’ve gotta say that pipe is a work of art -
-
Looking good Cal, just needs a reg plate mate.
-
That looks brilliant now buddy what cylinder and head combination are you using ? Are you using a vhm head ? Thats going to be fun
-
Cheers lads, yeah it's not far off now. Just want a few bits painted and I'll continue fitting the bits that arrived last night today.
@stinkwheeler Yeah it's Gilardoni 140 kit. It's basically a revised Gilardoni 122 barrel, with a matched VHM head. PJME rework the head to suit the barrel.
Always Originate, Never Pirate!
-
Cheers lads, yeah it's not far off now. Just want a few bits painted and I'll continue fitting the bits that arrived last night today.
@stinkwheeler Yeah it's Gilardoni 140 kit. It's basically a revised Gilardoni 122 barrel, with a matched VHM head. PJME rework the head to suit the barrel.
@calum fair play that will be awsume the 140 is supposed to still rev like a 125 will be good to see it all finished i do like the colour scheme too
-
So it's the start of the month again....I guess I better throw all my money away and live on baked beans for the rest of the month....
Some very bland, boring OEM spares. All genuine.
A gorgeous TYGA Pipe Stainless Steel with Carbon end can. These guys made all my carbon fibre parts plus my rearsets. So I very much rate them!
And because you were all complaining about my anemic bike, I've wheeled her outside for some photos.
And before anyone complains, yes, the photos have been touched up a little to make them look a little better. My camera is so poo it just doesn't do the bike any justice. So contrast and brightness have been notched and the saturation up'd slightly. But for comparison, here is a photo of the bike without any filters on.
The rest of the photos have been touched up to remove the block of wood and any imperfections.
My camera then overheated and died lol. Luckily it came back to life so I could retrieve the images. Not going to lie, even just the push from the garage to the garden had me sweating like crazy #SoUnfit!
Some more bits have literally just arrived, but I will probably get to them tomorrow.
Started work on the Hydraulic clutch as well now. Got the photos of that on my W810i Sony Walkman phone...you can tell where all my money has gone. I don't know how well the photos will come out on that. Hopefully be decent enough for people to follow. It's coming together nicely. Finished off the machining to the adapter plate last night. Just need to modify the clutch cover to take the slave cylinder. @NINJA watch this space for how to do it. I will put up a tutorial. The way the other guy done it wouldn't have lasted.
-
Zeeltronic Ignition System arrived Friday evening.
I had the tail light fitted upside down DOH!
But now all the wiring to the rear end is done. I think that's the bike pretty much down. Rear is all bolted in place. Just awaiting powervalve housing to come into stock and then a new clutch. So close now.
Always Originate, Never Pirate!
-
Zeeltronic Ignition System arrived Friday evening.
I had the tail light fitted upside down DOH!
But now all the wiring to the rear end is done. I think that's the bike pretty much down. Rear is all bolted in place. Just awaiting powervalve housing to come into stock and then a new clutch. So close now.
-
Alitalia Biaggi rep, mint
-
@Calum 🤩
-
Ordered the last few components for this this morning. Clutch braided line from Hel, Lithium battery and brand new OEM clutch plates and friction plates. Plus a few bits of bling for the clutch cover.
Hydraulic Clutch Conversion finished.
Always Originate, Never Pirate!
