TDR125 4GW
-
@Mightyman Shiney steel - all polished up then!!!
-
@Zrako calum's method works great. i've got some close up pictures so you can see how it works
https://dt125r.co.uk/topic/595/project-i-can-t-leave-things-alone
i used a stock dtr lower bearing in the frame with the yz forks and the stock yz top bearing sat in the new bearing cup
@gareth_iowc awesome mate , defo will do the cup. What material did you used?
Btw what you planning to do with the other yz engine? -
@Zrako the guy made it out of alloy
The 1lx is up for sale
-
@Zrako the guy made it out of alloy
The 1lx is up for sale
@gareth_iowc I was wondering if alloy is good.
-
@gareth_iowc I was wondering if alloy is good.
-
@Zrako It's going to be softer than steel, the head stock can take a battering as well, it's under some levels of force. But I'd imagine it would be fine. After all the aprilia is an Alloy Frame/Headstock.
So it should be up to the task fine.
-
This post is deleted!
-
-