Clear Carb Warming Hoses
-
@Jens-Eskildsen Yeah mate, been on the forum for nearly a decade, I've seen it all. Oil pump failed on my Belgarda engine, which is the engine in the photo with the clear hoses at the top.
When I fitted a new pump I put clear hoses on it so that I would see immediately when I came to the bike if there was oil getting into the engine.
Yeah granted it won't help when you're riding, but in the morning when you pull the kick start out, you will see the clear line.
-
Must admit I haven't heard too much about them failing in person, but I'm not going to turn down advice from a DT guru! So I fitted mine last year and I know I'll be very thankful if I ever look and see no oil, as I'll have hopefully caught it before it was too late.
-
-
-
@Mightyman OOOHHH that rust sure needs sorting dude, takes the edge off them pukka coolant pipes for-sure!!!
-
So, i bought some clear pipe, and installed it on the oil feed line, so a bit of bling, and a bit more pink for the bike aswell
Theres not much flow in the carb-warming pipes, i see some air in there, so I guess I need to bleed them a bit more, and see if that will help.
Then raced it at a small mx track:
-
@Jens-Eskildsen looking lovely mate!
-
@Jens-Eskildsen mine had air for the first couple minutes of running before it bled itself up.
-
