TDR issue
-
wrote on 13 Sept 2017, 08:36 last edited by
Iirc about 70 ish
-
wrote on 17 Sept 2017, 19:38 last edited by
Quick update
So my TDR belgarda had a full engine rebuild by Roadrunners motorcycles.
Also I have started premix. I used about 35 ml of 2 stroke oil to mix with the petrol.
There is video
https://www.youtube.com/watch?v=gjEHSmpNIgg
What do you think guys?
Just wondering if it everything ok.
-
wrote on 17 Sept 2017, 19:47 last edited by Calum
I used 200ml oil to a full tanks. Approx 10 litres.
Lovely little whistle to that engine too. Sounds great.
-
wrote on 17 Sept 2017, 22:37 last edited by
Never heard a sound like that coming from one of these
-
wrote on 17 Sept 2017, 23:16 last edited by
Sounds a bit chirpy? Can't think what would cause that, unless its just the recording
-
wrote on 18 Sept 2017, 02:36 last edited by
Oh thats same thing as I had on my dt. Thats the starter clutch not releasing after engine start.
-
wrote on 18 Sept 2017, 07:51 last edited by
Sounds like the engine is very tight to me from the rebuild. Hard to tell from a YouTube video
Looks like you are making good progress though mate
-
wrote on 18 Sept 2017, 09:37 last edited by
Check my vid , same sound
-
wrote on 18 Sept 2017, 15:46 last edited by
Never been posh enough to have an electric start DT so wouldn't know
-
wrote on 18 Sept 2017, 17:05 last edited by
Nice colour red though
-
wrote on 18 Sept 2017, 17:11 last edited by
Yes looks good in that color scheme
-
Check my vid , same sound
-
@zrako Yes, it looks like is the same thing with mine.
Have you fixed that or just ignored?
wrote on 18 Sept 2017, 20:19 last edited by@tdrnoob first thing I did was removed starter motor to see if its really that problem and it was. I had a broked bearing stay. Thats a plate behind a flywheel where starter clutch sits on needle bearing . I am replaced it , cleaned and lubed everything in there and its ok now.
Number 1 was broken .
-
@tdrnoob first thing I did was removed starter motor to see if its really that problem and it was. I had a broked bearing stay. Thats a plate behind a flywheel where starter clutch sits on needle bearing . I am replaced it , cleaned and lubed everything in there and its ok now.
Number 1 was broken .
-
Sounds like the engine is very tight to me from the rebuild. Hard to tell from a YouTube video
Looks like you are making good progress though mate
wrote on 19 Sept 2017, 08:03 last edited by@nottsbiker Not sure if it is tight as it is my first bike
Also I have changed the old air filter and cleaned the carb properly.
Good progress because of wanting to ride and commute to work.
I bought it back in may and since then made only 100 miles.
-
wrote on 19 Sept 2017, 12:25 last edited by
Did you get it from Unit 5 Motos? Seen one like yours on their Facebook page with one black side panel on an otherwise red TDR.
I'm in France at the moment and there are loads of Belgarda's for sale here, mainly our model with wire wheels in various conditions from €600 upwards. Typical I'm skint
-
Did you get it from Unit 5 Motos? Seen one like yours on their Facebook page with one black side panel on an otherwise red TDR.
I'm in France at the moment and there are loads of Belgarda's for sale here, mainly our model with wire wheels in various conditions from €600 upwards. Typical I'm skint
wrote on 19 Sept 2017, 15:38 last edited by@nottsbiker Yes I did.
I was following them and waiting for something special like this.
On which french website you are searching for those Belgardas?
-
wrote on 19 Sept 2017, 16:44 last edited by Nottsbiker
Lebancoin
You will struggle to find anyone willing to post to the uk and the shipping rates are crazy from here.
Loads of lovely WR200's out here too
J'ai trouvé une annonce qui devrait vous intéresser sur leboncoin
-
wrote on 19 Sept 2017, 16:55 last edited by
An example of a colour scheme I really like the look of;
J'ai trouvé une annonce qui devrait vous intéresser sur leboncoin
