TDR issue

[Nottsbiker]

@tdrnoob said in TDR issue:

@nottsbiker Hi. You wrote earlier to increase the jetting by 5%. It has pilot jet and main jet so do you mean those two to change to higher ones by 5%?

I will test the bike with the original ones first

I'm not an expert on jetting just relaying what I'd read years back. If in doubt get it set up by a tuner

[TDRnoob]

@nottsbiker Thats great! I really need it.

Could you please email it to me d.matuiza@gmail.com

Many thanks

[Nottsbiker]

Sent over!

[Mightyman]

@Nottsbiker is there many pages? It would be great if we can get them uploaded into a thread of their own.

[Nottsbiker]

Iirc about 70 ish

[TDRnoob]

Quick update

So my TDR belgarda had a full engine rebuild by Roadrunners motorcycles.

Also I have started premix. I used about 35 ml of 2 stroke oil to mix with the petrol.

There is video

https://www.youtube.com/watch?v=gjEHSmpNIgg

What do you think guys?

Just wondering if it everything ok.

[Calum]

I used 200ml oil to a full tanks. Approx 10 litres.

Lovely little whistle to that engine too. Sounds great.

[Mightyman]

Never heard a sound like that coming from one of these

[oldman]

Sounds a bit chirpy? Can't think what would cause that, unless its just the recording

[Zrako]

Oh thats same thing as I had on my dt. Thats the starter clutch not releasing after engine start.

[Nottsbiker]

Sounds like the engine is very tight to me from the rebuild. Hard to tell from a YouTube video

Looks like you are making good progress though mate

[Zrako]

https://youtu.be/cleKkIbDTeI

Check my vid , same sound

[Nottsbiker]

Never been posh enough to have an electric start DT so wouldn't know

[oldman]

Nice colour red though

[Nottsbiker]

Yes looks good in that color scheme

[TDRnoob]

@oldman I have changed the old seat cover with the new blue leather. It is not perfect fitted as I couldn't stretch properly where is angle.

Pretty happy with this blue color

[TDRnoob]

@zrako Yes, it looks like is the same thing with mine.

Have you fixed that or just ignored?

[Zrako]

@tdrnoob first thing I did was removed starter motor to see if its really that problem and it was. I had a broked bearing stay. Thats a plate behind a flywheel where starter clutch sits on needle bearing . I am replaced it , cleaned and lubed everything in there and its ok now.

Number 1 was broken .

[TDRnoob]

@zrako Thank you

[TDRnoob]

@nottsbiker Not sure if it is tight as it is my first bike

Also I have changed the old air filter and cleaned the carb properly.

Good progress because of wanting to ride and commute to work.

I bought it back in may and since then made only 100 miles.