TDR issue

[Nottsbiker]

Ps I've picked up a complete pdf of the 3SH parts list with full pictures and Yamaha part numbers from the German TDR forum.

I'm currently in France on holiday but can email it to you when I'm near some wifi if it's any use to you?

[Nottsbiker]

@tdrnoob said in TDR issue:

@nottsbiker Hi. You wrote earlier to increase the jetting by 5%. It has pilot jet and main jet so do you mean those two to change to higher ones by 5%?

I will test the bike with the original ones first

I'm not an expert on jetting just relaying what I'd read years back. If in doubt get it set up by a tuner

[TDRnoob]

@nottsbiker Thats great! I really need it.

Could you please email it to me d.matuiza@gmail.com

Many thanks

[Nottsbiker]

Sent over!

[Mightyman]

@Nottsbiker is there many pages? It would be great if we can get them uploaded into a thread of their own.

[Nottsbiker]

Iirc about 70 ish

[TDRnoob]

Quick update

So my TDR belgarda had a full engine rebuild by Roadrunners motorcycles.

Also I have started premix. I used about 35 ml of 2 stroke oil to mix with the petrol.

There is video

https://www.youtube.com/watch?v=gjEHSmpNIgg

What do you think guys?

Just wondering if it everything ok.

[Calum]

I used 200ml oil to a full tanks. Approx 10 litres.

Lovely little whistle to that engine too. Sounds great.

[Mightyman]

Never heard a sound like that coming from one of these

[oldman]

Sounds a bit chirpy? Can't think what would cause that, unless its just the recording

[Zrako]

Oh thats same thing as I had on my dt. Thats the starter clutch not releasing after engine start.

[Nottsbiker]

Sounds like the engine is very tight to me from the rebuild. Hard to tell from a YouTube video

Looks like you are making good progress though mate

[Zrako]

https://youtu.be/cleKkIbDTeI

Check my vid , same sound

[Nottsbiker]

Never been posh enough to have an electric start DT so wouldn't know

[oldman]

Nice colour red though

[Nottsbiker]

Yes looks good in that color scheme

[TDRnoob]

@oldman I have changed the old seat cover with the new blue leather. It is not perfect fitted as I couldn't stretch properly where is angle.

Pretty happy with this blue color

[TDRnoob]

@zrako Yes, it looks like is the same thing with mine.

Have you fixed that or just ignored?

[Zrako]

@tdrnoob first thing I did was removed starter motor to see if its really that problem and it was. I had a broked bearing stay. Thats a plate behind a flywheel where starter clutch sits on needle bearing . I am replaced it , cleaned and lubed everything in there and its ok now.

Number 1 was broken .

[TDRnoob]

@zrako Thank you