Thermo unit Earthing help required.
-
wrote on 12 Sept 2017, 11:04 last edited by Zrako 9 Dec 2017, 12:05
Never heard of temp sensor with earth.
To be honest the terminal looks like from battery but wire is too small for it. -
wrote on 12 Sept 2017, 11:45 last edited by
If it's an earth wire, then anywhere on the frame will suit.
-
wrote on 12 Sept 2017, 13:27 last edited by
I think that should go on one of the regulator mounting bolts. Under the RH side scoop
-
wrote on 12 Sept 2017, 13:31 last edited by
Cheers chaps I'll get that homed immediately , also I don't suppose any of you gents would have any idea to as why when I connect the battery the starter motor turns itselfs weather the keys are in the ignition or not?
-
Cheers chaps I'll get that homed immediately , also I don't suppose any of you gents would have any idea to as why when I connect the battery the starter motor turns itselfs weather the keys are in the ignition or not?
wrote on 12 Sept 2017, 13:32 last edited by@tdrgreg2 starter relay might be stuck closed
-
wrote on 12 Sept 2017, 15:10 last edited by
@finnerz89 could you please go further in depth
-
wrote on 12 Sept 2017, 15:24 last edited by
@finnerz89 Would it though? Because the starter button is switch live is it not?
-
@finnerz89 Would it though? Because the starter button is switch live is it not?
-
@calum yeah, it has a direct feed from the battery, if the contacts inside are welded together then as soon as you put power to it the motors going to turn
wrote on 12 Sept 2017, 15:30 last edited by@finnerz89 Sorry I thought he meant that the button works if the switch is on or off.
Just read it again, yeah what you said sounds about right
-
@finnerz89 Sorry I thought he meant that the button works if the switch is on or off.
Just read it again, yeah what you said sounds about right
-
wrote on 12 Sept 2017, 19:34 last edited by
Does this mount to the coil bolt. Looks like it fits onto something. The loom on the Belgarda TDR is slightly different to the DTR ones.
-
Does this mount to the coil bolt. Looks like it fits onto something. The loom on the Belgarda TDR is slightly different to the DTR ones.
wrote on 12 Sept 2017, 19:38 last edited by@nottsbiker I thought regulator mount, looks like the one on my DTX. Either way anywhere on the frame should do
-
wrote on 12 Sept 2017, 20:05 last edited by
Regulator mounts differently on the TDR to the X. Yours iirc it's on the rad frame and the TDR one fits like the DTR under the seat and is held on with a screw that doesn't hold anything else on
-
Regulator mounts differently on the TDR to the X. Yours iirc it's on the rad frame and the TDR one fits like the DTR under the seat and is held on with a screw that doesn't hold anything else on
wrote on 19 Sept 2017, 12:24 last edited by@nottsbiker would you happen to know how the starter relay is wired up . Amy pictures would be a bonus.
-
wrote on 19 Sept 2017, 12:30 last edited by
Is it not in that pdf i sent out last week?
Iirc it's connected to the battery via a heavy duty red (positive) cable which then goes to the starter motor. I think that the black (earth) cable goes from the battery to the solenoid then from there attaches to the engine. There is also a two wire plug that goes to the solenoid which is the lower power switching signal which is connected to the starter button.
No pics I'm afraid I'm away on holiday at mo
