PIC HEAVY (wr200 topend , zeeltronic, tm34ss carb, V-force reed block,Larger radiator,DEP PIPE,)
-
Some progress, I fitted the front wheel and fitted the bearings, spacer and seals in the rear wheel, I didn't have enough time to fit it though.
-
-
One down, one to go
-
This post is deleted!
-
Wheels on point
-
-
@mad73 yes it does
thanks a lot -
Hi. Can you get me contact of the man who makes the engine sump protection and the frameguards? Please. Because I can not find I'm. Pleasantly me know where u get those stainless spokes and nipples. Cause I can't find them either. Thanks.and. Congratulations on that amazing bike
-
how can i send a private sms to this man ?
i not know how to use the chat so good -
how can i send a private sms to this man ?
i not know how to use the chat so good@yamahalover The guy who makes them can be found on Facebook his Facebook user name is further up this thread but he doesn't make them anymore unfortunately as I've enquired about them myself .
-
Thanks guys, yes the zeeltronic is amazing. I was the one who helped zeeltronic make a cdi for the dt125r 2003 with my specs, data and wiring with the connector blocks pictures. Really helped set the correct powervalve curve and limits with my wr200 top end and using the dt125r stator plate, also the ignition timing.
-
@Louis-James hi
how much different does the zeeltronic make to you?
does it come with plugs fitted to the cdi?
@aidan1996 makes all the difference, especially as I have a wr200 top end. Let's me have more variation from fully close to open on the PV. Also advancing the ignition timing was a big bonus.
Mine was the first one ever for my model of Dt125r which I helped them develop it.
They made mine for free but I had to pay for the hand held programmer. -
That bike is a piece of art!!! Fairplay dude thats one of the best dt's I've seen
-
That bike is a piece of art!!! Fairplay dude thats one of the best dt's I've seen
@smudge1995 thank you very much
-
-
This post is deleted!
-
