PIC HEAVY (wr200 topend , zeeltronic, tm34ss carb, V-force reed block,Larger radiator,DEP PIPE,)

[Louis-DT-WR]

@mad73 yes it does thanks a lot

[yamahalover]

Hi. Can you get me contact of the man who makes the engine sump protection and the frameguards? Please. Because I can not find I'm. Pleasantly me know where u get those stainless spokes and nipples. Cause I can't find them either. Thanks.and. Congratulations on that amazing bike

[yamahalover]

how can i send a private sms to this man ?
i not know how to use the chat so good

[Biker_123]

@yamahalover The guy who makes them can be found on Facebook his Facebook user name is further up this thread but he doesn't make them anymore unfortunately as I've enquired about them myself .

[aidan1996]

@Louis-James hi

how much different does the zeeltronic make to you?

does it come with plugs fitted to the cdi?

[Louis-DT-WR]

@aidan1996 makes all the difference, especially as I have a wr200 top end. Let's me have more variation from fully close to open on the PV. Also advancing the ignition timing was a big bonus.

Mine was the first one ever for my model of Dt125r which I helped them develop it.
They made mine for free but I had to pay for the hand held programmer.

[smudge1995]

That bike is a piece of art!!! Fairplay dude thats one of the best dt's I've seen

[Louis-DT-WR]

@smudge1995 thank you very much

[Louis-DT-WR]

This post is deleted!

[Calum]

@Louis-James You need to embed them but.

There is a tutorial on here if you're unsure.

[Louis-DT-WR]

This post is deleted!

[Calum]

@Louis-James Yes but I am no longer using that plugin anymore since everytime I upgrade the forum I have to remember what plugins I installed and it was annoying me so I stopped. Ask cyberninja how many times I forget the flipping emoticons lmao

[Louis-DT-WR]

This post is deleted!

[Calum]

@Louis-James As said there is a guide on here how to do it, it's straightforward nothing complex about it.

[Louis-DT-WR]

This post is deleted!

[Calum]

@Louis-James It's up to you, it's your build thread, display the information however you want.

I'm sure my build has got more photos than yours and I managed alright. It's something I took pride in.

One thing I did was move all of the photos off the first post, so that the page can load and then you can load the photos later. But I sort by latest post. I also moved all the build pictures into one post so it was just a continuous blog.

But each to their own.

[Darty]

@Calum Just to butt in a sec,

I've noticed my Flickr links are not embedded anymore, and wont do so..

I will have to go through and re link every one from a different hosting site?

[Calum]

@Darty No they probably just need embedding properly.

[Louis-DT-WR]

Got a few small but satisfying jobs to do.

Fit the 17t front sprocket to gear up.

Fit stronger clutch springs (uprated wr200 ones)

Coolant and oil change.

Custom thicker core alloy radiator.

Replace LH crank case cover with a silver one to match.

General fine tune and visual tweeks.

I have it on the bench next to a standard one with a spare sub frame bracket. Bottom hose connector needs repositioning. Mounting brackets need welding on and also for the guard

[Louis-DT-WR]

Starting the fabrication, sits very nicely in the sub frame. Removed hose connections and prepped new ones to be welded on (and weld the big hole)

Then I'll fabricate new brackets to take the old rubber mounts. Also checked the clearance for when it's on the bike. Should be plenty room before hits the fuel tank.

Fabricated the two mounting brackets. Jigged it up using the subframe to ensure it's not going to rub. It will be free floating on the rubber mounts as it should.