Skip to content
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
Skins
  • Light
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Default (Slate)
  • No Skin
Collapse
Brand Logo

DT125R FORUM

  1. Home
  2. Owners Build Threads
  3. Other
  4. CB750 scrambler project

CB750 scrambler project

Scheduled Pinned Locked Moved Other
139 Posts 11 Posters 20.4k Views 2 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Louis-DT-WRL Louis-DT-WR

    @markus-w great thanks but I have a dt200wr which was sold in the US and that wasn't push-pull.
    The carbs to have slots for two cables day + choke cable.

    the CB 750 doesn't seem to have that breather pipe, but on this cbx750 it does.

    Brains hurting from all the learning on this build haha.

    I'm happy the rolling chassis is done.

    markus.wM Offline
    markus.wM Offline
    markus.w
    wrote on last edited by
    #27

    @Louis-DT-WR my thirst for knowledge has got the better of me I've just done a bit of googling and apparently it's only four strokes have 2 cables because the extra vacuum created by a 4 stroke can cause the throttle slide to flutter and jam against the side of the body. That seems to me the most logical explanation so far.

    Louis-DT-WRL 1 Reply Last reply
    0
    • markus.wM markus.w

      @Louis-DT-WR my thirst for knowledge has got the better of me I've just done a bit of googling and apparently it's only four strokes have 2 cables because the extra vacuum created by a 4 stroke can cause the throttle slide to flutter and jam against the side of the body. That seems to me the most logical explanation so far.

      Louis-DT-WRL Offline
      Louis-DT-WRL Offline
      Louis-DT-WR
      wrote on last edited by
      #28

      @markus-w possible. The other thing with this engine is why does it have 2 oil fillers caps 🤷‍♂️ 1 says (don't open) but that's the sprocket side.
      In some pictures I see that's where the dipstick is on some bikes. My dipsticks on the clutch cover side like most bikes.

      Haynes don't do a cbx750 manual.
      Just going to persist working through all the small bits.

      Louis-DT-WRL 1 Reply Last reply
      0
      • Louis-DT-WRL Louis-DT-WR

        @markus-w possible. The other thing with this engine is why does it have 2 oil fillers caps 🤷‍♂️ 1 says (don't open) but that's the sprocket side.
        In some pictures I see that's where the dipstick is on some bikes. My dipsticks on the clutch cover side like most bikes.

        Haynes don't do a cbx750 manual.
        Just going to persist working through all the small bits.

        Louis-DT-WRL Offline
        Louis-DT-WRL Offline
        Louis-DT-WR
        wrote on last edited by
        #29

        So the carbs were very similar but not correct.
        So I started again 😂 parts are taking so long to come from overseas

        alt text

        alt text
        alt text
        alt text
        alt text
        alt text
        alt text
        alt text
        alt text

        All new float bowl gaskets, diaphragms, o-rings and rejetted.
        Powder coated parts

        Stainless steel Allen cap bolts

        1 Reply Last reply
        1
        • DartyD Offline
          DartyD Offline
          Darty
          wrote on last edited by
          #30

          Too many strokes in that engine

          Keep it real

          Louis-DT-WRL 1 Reply Last reply
          1
          • DartyD Darty

            Too many strokes in that engine

            Louis-DT-WRL Offline
            Louis-DT-WRL Offline
            Louis-DT-WR
            wrote on last edited by
            #31

            @Darty yes but 4 cylinders is a nice compensation

            I've got a name for her.... "Lucille" 😂🏏

            1 Reply Last reply
            1
            • CalumC Offline
              CalumC Offline
              Calum
              wrote on last edited by
              #32

              I mean, yeah I agree two many strokes.

              But doesn't stop this being a really interesting and cool build.

              Loving it pal, keep it up!

              Always Originate, Never Pirate!

              Louis-DT-WRL 1 Reply Last reply
              0
              • CalumC Calum

                I mean, yeah I agree two many strokes.

                But doesn't stop this being a really interesting and cool build.

                Loving it pal, keep it up!

                Louis-DT-WRL Offline
                Louis-DT-WRL Offline
                Louis-DT-WR
                wrote on last edited by
                #33

                @Calum cheers man, will keep posting when I get some big progress, stupid Chinese virus is holding up my parts

                1 Reply Last reply
                0
                • Louis-DT-WRL Offline
                  Louis-DT-WRL Offline
                  Louis-DT-WR
                  wrote on last edited by
                  #34

                  Finally my bar clamps came, 3 weeks.
                  I've got the controls, grip, master cylinders on. Front brake operational.
                  Choke and throttle cables.
                  Front headlight on the number board (not finished yet) more to add to it.

                  Pro taper contour bars.

                  Rear fender (when pulled out, it's a shovel! (Entrenching tool))

                  Slowly making progress.

                  alt text
                  alt text
                  alt text
                  alt text
                  alt text
                  alt text
                  alt text

                  declanD 1 Reply Last reply
                  1
                  • Louis-DT-WRL Louis-DT-WR

                    Finally my bar clamps came, 3 weeks.
                    I've got the controls, grip, master cylinders on. Front brake operational.
                    Choke and throttle cables.
                    Front headlight on the number board (not finished yet) more to add to it.

                    Pro taper contour bars.

                    Rear fender (when pulled out, it's a shovel! (Entrenching tool))

                    Slowly making progress.

                    alt text
                    alt text
                    alt text
                    alt text
                    alt text
                    alt text
                    alt text

                    declanD Offline
                    declanD Offline
                    declan
                    wrote on last edited by
                    #35

                    @Louis-DT-WR i like the shovel rear fender adds character

                    1 Reply Last reply
                    1
                    • Louis-DT-WRL Offline
                      Louis-DT-WRL Offline
                      Louis-DT-WR
                      wrote on last edited by
                      #36

                      Been driving me crazy how the seller of the engine said it was from a cb750 but appears to be a cbx750 engine (much older + hydraulic clutch) rc17/17E

                      But the engine apparently had only done 12k
                      Also looks very new for something that would be 40 years old nearly.

                      After a lot of research the Japanese did a later 2007 LTD with the Rc17E engine when looking at the part numbers for the upper crankcase on this models parts diagram it confirms this.
                      This is a super rare models engine, + hydraulic clutch optional extra. On an import!

                      But it will work perfectly for me, just ordered the correct pulse generator.
                      Writing this down for future reference because I'll forget.

                      1 Reply Last reply
                      1
                      • Louis-DT-WRL Offline
                        Louis-DT-WRL Offline
                        Louis-DT-WR
                        wrote on last edited by
                        #37

                        Started on the looming and electrics.
                        Repositioned the coils to clear the fuel tank.
                        Little jobs like that take a lot of time getting right.

                        My holster on the headlight number board is all part of the walking dead style bike. It definitely wouldn't be ridden with that on it 😂 even though I'm trained on glocks , this is just a replica.
                        Only used for pics 🙂

                        alt text

                        alt text

                        alt text

                        alt text

                        alt text

                        alt text

                        R 1 Reply Last reply
                        1
                        • Louis-DT-WRL Louis-DT-WR

                          Started on the looming and electrics.
                          Repositioned the coils to clear the fuel tank.
                          Little jobs like that take a lot of time getting right.

                          My holster on the headlight number board is all part of the walking dead style bike. It definitely wouldn't be ridden with that on it 😂 even though I'm trained on glocks , this is just a replica.
                          Only used for pics 🙂

                          alt text

                          alt text

                          alt text

                          alt text

                          alt text

                          alt text

                          R Offline
                          R Offline
                          rolz82
                          wrote on last edited by
                          #38

                          @Louis-DT-WR this looks amazing, well done

                          Louis-DT-WRL 1 Reply Last reply
                          0
                          • R rolz82

                            @Louis-DT-WR this looks amazing, well done

                            Louis-DT-WRL Offline
                            Louis-DT-WRL Offline
                            Louis-DT-WR
                            wrote on last edited by
                            #39

                            @rolz82 thank you, working through all the electrics. My least favourite thing

                            1 Reply Last reply
                            0
                            • CalumC Offline
                              CalumC Offline
                              Calum
                              wrote on last edited by
                              #40

                              Wow, this looks gnarly as fuck!

                              Always Originate, Never Pirate!

                              1 Reply Last reply
                              1
                              • Louis-DT-WRL Offline
                                Louis-DT-WRL Offline
                                Louis-DT-WR
                                wrote on last edited by
                                #41

                                Working through the electrics. I've got my rear indicators and tail lights sorted.
                                I made a CDI holder to relocate it.
                                Fuse box and indicator regular relocated.
                                Front lights, indicators and horn on.
                                Ignition barrel relocation plate made.
                                Just sorting a battery box and the battery is on order. I can't fully test what connector goes where until the battery comes.

                                alt text
                                alt text
                                alt text
                                alt text
                                alt text
                                alt text
                                alt text

                                1 Reply Last reply
                                1
                                • Louis-DT-WRL Offline
                                  Louis-DT-WRL Offline
                                  Louis-DT-WR
                                  wrote on last edited by
                                  #42

                                  Well I put the engine in alone which was a very heavy task 💪 killed my back haha. Lining it up with the mounts while the bike was leaning again the bench. (You can't fit the engine when the chassis is on a bike lift)

                                  Got my battery box mounted with the lithium battery. Its so light! I thought it was just a empty case!

                                  alt text

                                  Carbs on + filters and cables. Fitting the carbs was tricky, the rubber manifolds are so hard. I'd replace them but £150+vat for 4 and they're not cracked.

                                  alt text
                                  alt text

                                  alt text
                                  alt text

                                  Louis-DT-WRL 1 Reply Last reply
                                  1
                                  • Louis-DT-WRL Louis-DT-WR

                                    Well I put the engine in alone which was a very heavy task 💪 killed my back haha. Lining it up with the mounts while the bike was leaning again the bench. (You can't fit the engine when the chassis is on a bike lift)

                                    Got my battery box mounted with the lithium battery. Its so light! I thought it was just a empty case!

                                    alt text

                                    Carbs on + filters and cables. Fitting the carbs was tricky, the rubber manifolds are so hard. I'd replace them but £150+vat for 4 and they're not cracked.

                                    alt text
                                    alt text

                                    alt text
                                    alt text

                                    Louis-DT-WRL Offline
                                    Louis-DT-WRL Offline
                                    Louis-DT-WR
                                    wrote on last edited by
                                    #43

                                    I even have a engine lift but it would have needed an offset cradle made up to clear the frame

                                    1 Reply Last reply
                                    0
                                    • CalumC Offline
                                      CalumC Offline
                                      Calum
                                      wrote on last edited by
                                      #44

                                      That does look smart as f to be fair!

                                      Always Originate, Never Pirate!

                                      Louis-DT-WRL 1 Reply Last reply
                                      1
                                      • CalumC Calum

                                        That does look smart as f to be fair!

                                        Louis-DT-WRL Offline
                                        Louis-DT-WRL Offline
                                        Louis-DT-WR
                                        wrote on last edited by
                                        #45

                                        @Calum cheers man. Its literally a case of getting parts in my hands and making it fit/fabricate parts. I wish fowler's would hurry up, waiting ages for my rear brake parts. And side stand bits

                                        1 Reply Last reply
                                        1
                                        • Louis-DT-WRL Offline
                                          Louis-DT-WRL Offline
                                          Louis-DT-WR
                                          wrote on last edited by
                                          #46

                                          alt text
                                          alt text
                                          alt text

                                          Little bits done, oil cooler fully connected, the pipes were bent, took a while to get them right.
                                          Oil filter came finally.
                                          PCV filters on.
                                          Started seat mounts and ignition switch relocation.

                                          The 2 most expensive items I need is an exhaust and starter motor.

                                          Still undecided what tank colour. I'm thinking Matt gunmetal grey. I was going to go black but think that would be over kill.

                                          declanD NINJAN 2 Replies Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Users
                                          • Groups