Athena 170
-
If I only had a kickstart...
-
@calum ehm. No. Won't change that. Problem lies somewhere else.
@irongamer727 That's what you want mate.
That'll fix your problem guaranteed!
I literally don't know why the original carb sucks balls lol.
Always Originate, Never Pirate!
-
@irongamer727 That's what you want mate.
That'll fix your problem guaranteed!
I literally don't know why the original carb sucks balls lol.
-
Things are not going my way. 180km into break in I spotted 2 small holes on the cylinder. I have spoken to the company I bought the kit from and they will contact Athena for assistance. Hopefully this ends well..
-
What do you think? I've now fitted a 310 main jet and she's still a bit down on power. It felt better than the 290 for sure. Now I'm thinking about buying a couple of extra jets, 320-350.
Is this even possible? I've not spoken to anyone running higher than 280. -
If using a TM28 carb then need a 300 main jet with a 27.5 idle jet. Main jets go up to 430. Put clip in the bottom groove on needle.
https://www.sip-scootershop.com/en/products/main+jet+mikuni+300+_40703000https://www.sip-scootershop.com/en/products/idle+jet+mikuni+275+_40726000
-
If using a TM28 carb then need a 300 main jet with a 27.5 idle jet. Main jets go up to 430. Put clip in the bottom groove on needle.
https://www.sip-scootershop.com/en/products/main+jet+mikuni+300+_40703000https://www.sip-scootershop.com/en/products/idle+jet+mikuni+275+_40726000
@2stroketerry I'm running 310 now and it's certainly not optimal. Idle is 35 now, definitely too big.
-
In reality, what would cause the bike not to start on the first or second spin on the starter. Is it just down to the pilot jet and fuel/Air mix?
Obviously a good battery and fresh electric components will make things easier but I got that covered.I've read in the Haynes that there is supposed to be a starter jet in the later carbs? Much of what that books says makes no sense...
-
I run the autolube on my dt125r bottom end with wr200 top end. I just adjusted it to suit the larger capacity. I've run it for years. Autolube is brilliant
-
I run the autolube on my dt125r bottom end with wr200 top end. I just adjusted it to suit the larger capacity. I've run it for years. Autolube is brilliant
@louis-james hows that thing to start?
-
-
First kick 99% of the time
@louis-james you run the 28mm carb? The flat one?
-
I used to, I had the tmx30 for a while, now a tm34ss
-
I used to, I had the tmx30 for a while, now a tm34ss
@louis-james you ran the 28 with the wr200?
-
No, I had the 30 when it was still a 125. Lid was cut off the air box the the 28mm btw
-
No, I had the 30 when it was still a 125. Lid was cut off the air box the the 28mm btw
-
@louis-james alright
@irongamer727 recommend getting a decent reed block on there. Many can be modified to fit
-
@irongamer727 recommend getting a decent reed block on there. Many can be modified to fit
@louis-james naah at the moment I simply want her to run good, start easy and stay that way.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login