Dtr 125 zeelectronic info
-
@darty Ah that's nice.
Yeah I didn't really think about the price to be fair. As said, I got mine for £160 from Skellerns.
@Irongamer727 Why would Yamaha not use the best one what?
The bikes were limited to 15Kw power. They achieved thay easily, and therefore had no need to create an aggressive map.
As said, aggressive maps are more prone to detonation, and therefore harder to tune for bikes to run all over the world without any modification.
They also are more peaky, and therefore less tractable.
But the maps on the RE are pretty sweet. Comes on nicely.
-
https://dt125r.co.uk/topic/77/yamaha-dt125r-01-running-project/86
I finally made a mount for it,
@Irongamer727 Yamaha's ignition curve is for low octane fuel range, reliability, low end torque and wide efficiency.
It is one of the most limiting factors of the engine,
Keep it real
-
Allright, I have spoken to both the zeeltronic company and the ignitech company. Both come with contacts and everything is plug and play. Both are programmable. However, I don't see the reason why you would go for the zeeltronic instead of the ignitech.
Ignitech prize plus connectors~170 €
Zeeltronic including connectors and some program ~ 300€
Ignitech seems like the obvious choice to me
-
@irongamer727 so let’s just get this right I buy igni set it up then just plug it in to my dtr straight fit no bullshit?
-
@irongamer727 I think darty said it worked really good
-
@declan just been looking at the software looks easy to deal with no stupid extra charge for a silly device to programme it just download plug into laptop and easy programme tool
"Muddy water is best cleared by leaving it alone" Alan Watts
-
@declan said in Dtr 125 zeelectronic info:
@terry-tz hmmm looks like I’m gonna have to ask Father Christmas lol do you know to any uk distributors?
Why not just use a standard 89/90 cdi there is no restriction at all in them and the bike will rev completely out and do the clock with the right gearing.
-
@scrimsmustang can't imagine them being cheap
-
@irongamer727 will do thank you!
-
@calum In theory could you not just try moving the statorplate to advance or retard the ignition slightly. I notice they are fixed set on all DTR,s by the screws with no adjustment allowed. Thats not the case on old DT,s like 175MX or DT125LC MK1 etc these all use cdi ignitions but all allow advance and retard at the statorplate.
-
@scrimsmustang Bore out the holes on the stator play to allow some wiggle room.
The problem is, you're stepping the whole ignition, even at high RPM's where the ignition will be slightly retarded to reduce the risk of detonation.
I know they do it to the Rotax, but then that's a competition engine. Where people maticulously maintain them. And they're built every season.
