The Leviathan Project
-
Snail trail pace, but it's getting there!
This piece I had to make up as the radiator swap meant these had to be cabled tied togeteher in one piece.
-
wrote on 14 Feb 2017, 12:23 last edited by
Sorry to refer back to the start of the thread, but, have you still got the how-to for the kickstart mod? And does it replace the electric start or can you keep both?
-
Sorry to refer back to the start of the thread, but, have you still got the how-to for the kickstart mod? And does it replace the electric start or can you keep both?
wrote on 14 Feb 2017, 12:52 last edited by@finnerz89 Keep both. The tutorial is on here bud try searching for it.
-
@finnerz89 Keep both. The tutorial is on here bud try searching for it.
-
wrote on 14 Feb 2017, 13:32 last edited by
@Calum did you see my post about the bearing cup?
-
@Calum did you see my post about the bearing cup?
wrote on 14 Feb 2017, 19:40 last edited by@gareth_iowc Yeah I did write a reply. Must have forgot to send it.
Basically it's not as simple as: grab a YZ that'll do
There is a bit more to it. Diagrams have to be made, measurements have to be made and having the physical item to hand always helps.
I also no longer have access to the lathe I used last time. I need to rewire the current lathe I have got.
So no I can't I'm afraid. I've written full guidance on how it can be done.
If I had a working lathe then it's possible. But it took me a fair few hours last time due to the inferior tools. An engineering firm should be able to CnC it in minutes if you draw up a diagram for them.
-
wrote on 14 Feb 2017, 20:18 last edited by
Ok man thanks.
I've got a guy in mind but I thought you might be with a try as you've done one before
-
Ok man thanks.
I've got a guy in mind but I thought you might be with a try as you've done one before
wrote on 14 Feb 2017, 21:56 last edited by@gareth_iowc I wrote a guide on the basic theory. Follow that and you can't go too far.
-
wrote on 13 Apr 2017, 11:49 last edited by
Two long years
-
wrote on 13 Apr 2017, 12:21 last edited by
Shit hot
when ours should have a stand together at a show 
-
Two long years
-
wrote on 13 Apr 2017, 18:27 last edited by
@CYBER-NINJA It's a fresh engine, so that'll be the oil used on assembly.
@Mightyman Nah not yet. There is still a fair amount of work to be done. But it's nice that it's all back up together and can be started. -
wrote on 13 Apr 2017, 20:26 last edited by
Hmmm i still cant decide which pipe to have off Romeu, i do like the look of the underslung one.
Sounds sweet though dude!
-
Hmmm i still cant decide which pipe to have off Romeu, i do like the look of the underslung one.
Sounds sweet though dude!
wrote on 13 Apr 2017, 21:06 last edited by@finnerz89 It's not for everyone. I love it. But I love being different.
-
wrote on 3 Mar 2018, 21:05 last edited by
Just interested. I read you doubted the porting on the cylinder right? But it turned out to be good? Do you remember what it cost?
-
Just interested. I read you doubted the porting on the cylinder right? But it turned out to be good? Do you remember what it cost?
wrote on 3 Mar 2018, 21:12 last edited by@irongamer727 I doubted the porting on the 3MB00P barrel. The porting by Mick Abbey is pucker. You want to get the head and barrel done together. 130 for the barrel 30 for the head.
Always Originate, Never Pirate!
-
@irongamer727 I doubted the porting on the 3MB00P barrel. The porting by Mick Abbey is pucker. You want to get the head and barrel done together. 130 for the barrel 30 for the head.
wrote on 3 Mar 2018, 21:27 last edited by@calum wait, what barrel are you running? 4BL? What bike is that from?
-
@irongamer727 I doubted the porting on the 3MB00P barrel. The porting by Mick Abbey is pucker. You want to get the head and barrel done together. 130 for the barrel 30 for the head.
-
@calum do the porting/ head work people have their own specs or do I need to find out the squish and such
