DT200WR restoration project pic heavy

[Louis-DT-WR]

So today I did a test start to check all lights work.
Speedo and all lights on the new clocks work.
When I try the indicators....
the rear indicator stays on solid and the front does not light up , the clocks light stays on solid also...
This happens on both left and right hand side.
I think this is exactly what happened when my dtr relay went... Any thoughts? Hard to source the correct relay.

[NINJA]

@Louis-James Does the clock light disappear when you put it in gear?

I presume that you've checked all the wires, grounds, connectors, fuses etc. to ensure that there's nothing shorting out? No LED's all lights are regular bulbs???

[Calum]

@Louis-James Double check the wiring to make sure you haven't connected up the wrong sides. Sounds like a relay issue to me, I've had that a few times before.

[Louis-DT-WR]

All the looming was Mint and I cleaned all connections. The neutral light goes off when in gear... I'm pretty sure it's the regulator issue I had on my dtr

[Louis-DT-WR]

@Calum that's what I think but it's a hard part to find. All earths were cleaned

[Calum]

I think I've had this before when only one of the indicators are connected.

[finnerz89]

What wattage lamps have you used in the indicators?
When I changed mine to higher wattage i got the same symptoms you're describing.

[Louis-DT-WR]

@finnerz89 they're original ones but new

[Calum]

@Louis-James Check that the bulbs haven't gone and/or that the loom provides continutity throughout.

[Louis-DT-WR]

@Calum cheers call, seems a bit of a coincidence that it's both sides

[Calum]

@Louis-James Just make sure front right is connected to rear right and front left is connected to rear left.

[finnerz89]

If the lamps are standard my money is on the relay. Try disconnecting one and see if you get a flash then.
Is the switchgear new?

[Louis-DT-WR]

@finnerz89 does a single flash then stats on.. always the small things take the time haha.

[finnerz89]

@Louis-James another thought, is the light in the clocks led? Try disconnecting that if it is

[Calum]

Yeah, could be your chinese clocks causing problems.

[Louis-DT-WR]

@finnerz89 no because I'm only using the new clocks shell. All wires and bulbs I swapped over

[finnerz89]

@Louis-James hmmmm

[Louis-DT-WR]

https://youtu.be/La0VeAoF2fU

[finnerz89]

Looking good

[Louis-DT-WR]

@finnerz89 thanks I'll get some more videos outside on a nice day