Dt125 re not charging battary
-
Hi can anyone help me with some ideas I've got a dtr that's almost new but been stood a few years I put a new battery on and everything was fine for a couple days then the battery died changed battary for a new one and did same in a couple days I guess it's not charging any common problems I could check thanks
-
Tbh j don't even want a battery the bikes pretty much brand new cant see what would be wrong I might just get one of thoes capacitors
-
Fix it instead of masking the problems. Get a cheap multimeter, and we will help you out. After that, get a capacitor if you want.
-
Good plan I'll grab one
-
Ok got me a multimeter where should I start ? Thanks
-
Not good the the battery is flat now engine off is at 3v and started at 5v
-
@reecesloane-2017 It runs with a flat battery?
Must be generating power.
-
Yes runs perfectly but brand new battary only lasted a couple days I thought it was the battary took it back and got another and that's done the same now all the lights work when running but doesn't charge the battary
-
Yes all
Look pretty good no damage that I can see nothing corroded bikes almost new so abit strange is it possible I'm ising the wrong battary I just got one that had the same dimensions and 12v ect surly it can't be that bad -
@reecesloane-2017 generally, as long as it's a 12v battery it shouldn't make any difference so that isn't your issue.
-
That's what I thought I'm stuck now electrics isn't my thing
-
@Mightyman little bit more to it than that bud. Obviously needs to be rated appropriately otherwise the engine will drain more power from the battery than the battery can supply. But the DT's could probably run off AA batteries lol.
-
So what would be the case now then where and how should I check any help
Would be great -
It's weird somtimes I think it may be shooting so where it has electric start and also kick start the other day I turned the ignition in and forgot the red on of switch so it was off but when I kicked the bike it was firing envelope a little smoke from the exhaust it wouldn't fully start but was 100% firing then die then I looked at the switch seen it was of turned it on and it started right up could this be an issue or is this normal thanks