Pv actions
-
@irongamer727 Looks like exhaust gases are leaking past the rubber oring from the bush.
That are the bush is excessively worn and needs replacing.
@calum probably since it's 500 km from brand new
-
-
It shouldn't be vibrating like so then?
-
Sounds right with 6k
-
Has anyone noticed that their bike is a lot louder with the valve pinned? Noticed I BIG difference on mine
-
Has anyone noticed that their bike is a lot louder with the valve pinned? Noticed I BIG difference on mine
@irongamer727 Yeah, the valve muffles the exhaust sound, when you pin it, you're blaring the combustion through the expansion chamber.
-
Has anyone noticed that their bike is a lot louder with the valve pinned? Noticed I BIG difference on mine
@irongamer727 mine seemed to idle a lot healthier pinned
-
@irongamer727 I've not seen that before no. You will wear the mechanism out like that.
@calum https://youtu.be/TWuDiIHVv4o
What do you think might be causing it to be that loose? Everything, even the screw holding the pv sides together is securely fasten.
-
It's leaking oil and even exhaust gases..
-
Yeah, it'll be down on performance if that's the case.
Are you sure the other side of the powervalve is fastened properly?
-
@calum yes. Fasten it extra today
@irongamer727 there's play between the pv and the cylinder. Is that normal?
-
@irongamer727 there's play between the pv and the cylinder. Is that normal?
-
-
@calum ideas? Just another thing to complain about to Athena?
@irongamer727 I’d say so yes
