It's only on the RE do mains come on with engine off, but only after you start the engine.

Yep, did that, and all the other stuff as mentioned above

Sussed it, dead short in the generator on the yellow and red to ground

@Bluestoesonnose Wise call - A stock bulb would ensure that you can track down any problems you have, without changing anything else or maybe adding anymore to the mix for-sure. :thumbs_up_medium-light_skin_tone:

@col29 Electrics are always a PITA for-sure. Just be methodical and follow the wires back looking for cut's, fault's and rusted grounds etc.

@Bluestoesonnose WOW - that's insane, thanks tho.

Hi, can't post pictures as I'm missing it and they are almost £60 to replace

@Irongamer727 Strip it all down, give it all a damn good clean and de-rust, then re-install it ensuring a good grounding occurs. Once installed apply a blob of Vaseline to the ground points to prevent further rusting - works a treat and lasts a long time too!!!

@finnerz89 Ah, cheers

Been using Colin at the following: https://kojaycat.co.uk Very helpful and seems to have all the DTR125R electrical connector blocks in stock. Cheers

@Calum Cheers, just saved me finding out the hard way

Many thanks, I have found a company who can rewire it, I'm just waiting for a ball park cost. Cheers

I end up buying an aftermarket start motor off eBay for £65 brand new fixed the problem my old motor was seized up and unable to turn hope this helps

Can HIGHLY recommend theese. You need an adaptorring for the stock headlight The light will flicker a bit at low idling. https://www.ebay.com/itm/Nighteye-H4-9003-HB2-8000LM-Car-LED-Headlight-Kit-Hi-Lo-Beam-Bulbs-6500K-White/391600374998?epid=907124270&hash=item5b2d3384d6%3Ag%3AqOYAAOSwlCdbGfEK&_sacat=0&_nkw=Nighteye+H4+9003+HB2+8000LM+Car+LED+Headlight+Kit+Hi%2FLo+Beam+Bulbs+6500K+White&LH_BIN=1&_from=R40&rt=nc Adaptor: https://www.ebay.com/itm/P45T-P43T-R2-H5-TO-H4-HEADLIGHT-BULB-ADAPTER-VINTAGE-CLASSIC-CAR-MOTOCYCLE/122807481195?hash=item1c97e5736b%3Ag%3AJ8gAAOSwh1haIcQF&_sop=15&_sacat=0&_nkw=H4+P45t+Headlight+ADAPTER&LH_BIN=1&_from=R40&rt=nc&LH_TitleDesc=0|0

@Calum yep. Soldered into working order.

just ordered a coil ht lead and cap. can't hurt having a new one on there for peace of mind

@calum How does them racing rotors destroy the engine?