PIC HEAVY (wr200 topend , zeeltronic, tm34ss carb, V-force reed block,Larger radiator,DEP PIPE,)
-
wrote on 17 Aug 2017, 22:04 last edited by Calum
You are going to need the embed link mate.
You need the URL of the image, not the web address it can be found at.
Easiest way, just use Imgur.
-
This post is deleted!
wrote on 17 Aug 2017, 22:11 last edited by NINJA@louis-james The polishing on your exhaust pipe is extremely disappointing bud.
I can't see your face in the reflection, please fix this ASAP - Thanks!!!
LOLLLZZZZZZZZZZZZZZZZZZZ
-
wrote on 17 Aug 2017, 23:09 last edited by
Good work, satisfying innit! How many hours have you put in?
-
You are going to need the embed link mate.
You need the URL of the image, not the web address it can be found at.
Easiest way, just use Imgur.
wrote on 18 Aug 2017, 08:21 last edited by@calum thanks callum, I tried imgur but apparently it's not supporting 3rd party hosting for much longer or its a rumour,
Someone mentioned a cloud button, I don't know what that it,
I'll keep trying until it works -
@louis-james The polishing on your exhaust pipe is extremely disappointing bud.
I can't see your face in the reflection, please fix this ASAP - Thanks!!!
LOLLLZZZZZZZZZZZZZZZZZZZ
wrote on 18 Aug 2017, 08:22 last edited by@cyber-ninja I know, but it's the plating from new! It's always been like that, especially on that part of the front pipe
-
wrote on 18 Aug 2017, 08:22 last edited by
@oldman said in PIC HEAVY (wr200 topend , zeeltronic, tm34ss carb, V-force reed block,Larger radiator,DEP PIPE,):
Good work, satisfying innit! How many hours have you put in?
Thank you, about 7years haha, on and off.
-
wrote on 18 Aug 2017, 08:30 last edited by
Interesting you went with the DEP pipe as I'd have thought the FMF one from the WR would have suited your cylinder better. Any particular reason for this choice?
-
@calum thanks callum, I tried imgur but apparently it's not supporting 3rd party hosting for much longer or its a rumour,
Someone mentioned a cloud button, I don't know what that it,
I'll keep trying until it workswrote on 18 Aug 2017, 10:01 last edited by Mightyman@louis-james this GIF should show you how to use the little cloud button I mentioned. It actually uses Imgur but simplifies the process for everyone here. I haven't heard of them cancelling 3rd party support but it would be very frustrating for us and many others if they do.
Note that if you are on mobile, you may need to swipe left on the editing tools to see it!
-
@calum thanks callum, I tried imgur but apparently it's not supporting 3rd party hosting for much longer or its a rumour,
Someone mentioned a cloud button, I don't know what that it,
I'll keep trying until it workswrote on 18 Aug 2017, 10:32 last edited by@louis-james Literally wrote a blog on this. Take the time to read and understand it as it's really not that technical.
-
Interesting you went with the DEP pipe as I'd have thought the FMF one from the WR would have suited your cylinder better. Any particular reason for this choice?
wrote on 18 Aug 2017, 10:41 last edited by Louis-DT-WR@nottsbiker I did consider the FMF but I saw a thread where someone put one on a Dt200r and it was close to the rad scoops and didn't want melt them, also the DEP were UK stock.
-
wrote on 18 Aug 2017, 10:48 last edited by Louis-DT-WR
Got the hang of it now. I will "repair" some of my broken images
-
wrote on 8 May 2018, 14:35 last edited by
-
wrote on 5 Jun 2018, 20:24 last edited by
I Got bored and decided to have a OCD moment and fit a seat strap, front fender rear extension to match the tenere theme, rebuilt the fuel cap with parts from my original cap to use original key(same as ignition), new indicator relay, mounted the zeeltronic using a p clip and frame bracket and used nutserts for a proper job, new chain guard.
I'm also fitting a underseat tool box like the French bikes have for an old school feel.
I'm mostly logging this for my own benefit as these mods probably seem boring now haha.
But I'm really considering installing the original numberplate holder/tail light, any thoughts?
Just want an old school feel. -
I Got bored and decided to have a OCD moment and fit a seat strap, front fender rear extension to match the tenere theme, rebuilt the fuel cap with parts from my original cap to use original key(same as ignition), new indicator relay, mounted the zeeltronic using a p clip and frame bracket and used nutserts for a proper job, new chain guard.
I'm also fitting a underseat tool box like the French bikes have for an old school feel.
I'm mostly logging this for my own benefit as these mods probably seem boring now haha.
But I'm really considering installing the original numberplate holder/tail light, any thoughts?
Just want an old school feel.wrote on 5 Jun 2018, 20:33 last edited by@louis-james looks fuckin sweet dude. Interested in the toolbox, I was thinking of something similar. It's dead space under there!
-
wrote on 5 Jun 2018, 20:58 last edited by
you can try the number plate and see how you get on. It's a sweet bike to be fair!
-
@louis-james looks fuckin sweet dude. Interested in the toolbox, I was thinking of something similar. It's dead space under there!
wrote on 5 Jun 2018, 21:16 last edited by Louis-DT-WR 6 May 2018, 23:51@finnerz89 said in PIC HEAVY (wr200 topend , zeeltronic, tm34ss carb, V-force reed block,Larger radiator,DEP PIPE,):
@louis-james looks fuckin sweet dude. Interested in the toolbox, I was thinking of something similar. It's dead space under there!
Thanks man, 
Got a similar box on order, see how I get in
-
wrote on 5 Jun 2018, 21:18 last edited by
@calum thanks Callum. Just trying to get the right combination of modification and the classic look. Hence why I'm putting some xt500 mirrors on, going to re-do the tail end, maybe a new fender without stupid Dunlop stickers
-
wrote on 6 Jun 2018, 08:32 last edited by
Almost looks like an yz125 from a distance, great looking bike bud!
-
wrote on 8 Jun 2018, 14:30 last edited by
I've decided, I'm toning down the bike and making it more original, funny because 8 years ago I threw the original front fender, inner mudguard/numberplate holder/tail light and original indicators in the bin because I wanted it to look more modern
Removed those ott ypvs stickers
I've ordered a brand new rear fender, numberplate holder, tail light and indicators.
My tool box came which I will mount with p-clips when I re-do the bikes rear end. I'm looking forward to see this looking retro -
wrote on 8 Jun 2018, 14:31 last edited by
