TDR issue
-
You should be able to get any spares you need from Allens Performance who stock parts for all makes of carb
wrote on 12 Sept 2017, 09:54 last edited by@nottsbiker Hi. You wrote earlier to increase the jetting by 5%. It has pilot jet and main jet so do you mean those two to change to higher ones by 5%?
I will test the bike with the original ones first
-
wrote on 12 Sept 2017, 09:54 last edited by
Ps I've picked up a complete pdf of the 3SH parts list with full pictures and Yamaha part numbers from the German TDR forum.
I'm currently in France on holiday but can email it to you when I'm near some wifi if it's any use to you?
-
@nottsbiker Hi. You wrote earlier to increase the jetting by 5%. It has pilot jet and main jet so do you mean those two to change to higher ones by 5%?
I will test the bike with the original ones first
wrote on 12 Sept 2017, 09:56 last edited by@nottsbiker Hi. You wrote earlier to increase the jetting by 5%. It has pilot jet and main jet so do you mean those two to change to higher ones by 5%?
I will test the bike with the original ones first
I'm not an expert on jetting just relaying what I'd read years back. If in doubt get it set up by a tuner
-
Ps I've picked up a complete pdf of the 3SH parts list with full pictures and Yamaha part numbers from the German TDR forum.
I'm currently in France on holiday but can email it to you when I'm near some wifi if it's any use to you?
wrote on 12 Sept 2017, 09:57 last edited by@nottsbiker Thats great! I really need it.
Could you please email it to me d.matuiza@gmail.com
Many thanks
-
wrote on 12 Sept 2017, 17:07 last edited by
Sent over!
-
wrote on 13 Sept 2017, 08:15 last edited by
@Nottsbiker is there many pages? It would be great if we can get them uploaded into a thread of their own.
-
wrote on 13 Sept 2017, 08:36 last edited by
Iirc about 70 ish
-
wrote on 17 Sept 2017, 19:38 last edited by
Quick update
So my TDR belgarda had a full engine rebuild by Roadrunners motorcycles.
Also I have started premix. I used about 35 ml of 2 stroke oil to mix with the petrol.
There is video
https://www.youtube.com/watch?v=gjEHSmpNIgg
What do you think guys?
Just wondering if it everything ok.
-
wrote on 17 Sept 2017, 19:47 last edited by Calum
I used 200ml oil to a full tanks. Approx 10 litres.
Lovely little whistle to that engine too. Sounds great.
-
wrote on 17 Sept 2017, 22:37 last edited by
Never heard a sound like that coming from one of these
-
wrote on 17 Sept 2017, 23:16 last edited by
Sounds a bit chirpy? Can't think what would cause that, unless its just the recording
-
wrote on 18 Sept 2017, 02:36 last edited by
Oh thats same thing as I had on my dt. Thats the starter clutch not releasing after engine start.
-
wrote on 18 Sept 2017, 07:51 last edited by
Sounds like the engine is very tight to me from the rebuild. Hard to tell from a YouTube video
Looks like you are making good progress though mate
-
wrote on 18 Sept 2017, 09:37 last edited by
Check my vid , same sound
-
wrote on 18 Sept 2017, 15:46 last edited by
Never been posh enough to have an electric start DT so wouldn't know
-
wrote on 18 Sept 2017, 17:05 last edited by
Nice colour red though
-
wrote on 18 Sept 2017, 17:11 last edited by
Yes looks good in that color scheme
-
Check my vid , same sound
-
@zrako Yes, it looks like is the same thing with mine.
Have you fixed that or just ignored?
wrote on 18 Sept 2017, 20:19 last edited by@tdrnoob first thing I did was removed starter motor to see if its really that problem and it was. I had a broked bearing stay. Thats a plate behind a flywheel where starter clutch sits on needle bearing . I am replaced it , cleaned and lubed everything in there and its ok now.
Number 1 was broken .
