DT125R FORUM

@rogering Hi - Welcome to the club, post some pics or start a build thread dude. 😉

Put the bearings for hour or so into the freezer 👌

Need to double check the condition but maybe £20

You could try something called Modelstrip. Available from many model shops, it strips paint off plastic models without damaging the plastic. Obviously test a small area first. Brake fluid will whiten the plastic. Bear in mind they were likely sprayed because they were worn out.

As someone else said, it would likely be cheaper and better just to buy new. I bought a new rear fender for £20 from Fowlers. Cheap as chips.

Look at this on eBay http://www.ebay.com/itm/262372673935

That should be the top of the Mikuni carb

Sorry boys dumb question just finished my rebuild to realise that pv will do cleaning cycle then when started the pv moves to closed position then opens accordingly

1 cubic centimeter equals to 1 mililiter

@declan yes it pulls right out

Sorted sorry for troubles guys and thanks 👍

https://dt125r.co.uk/topic/5/embedding-images give this thread a read.

I was going off float hight for a dtr when it was a Dt 2 mil difference and just realised the pod filter was batterd and was restricting air flow all good now cheers guys

Its shame but Im tried it and and its just hairdryer . Your bike will run lean . Thanks god I didnt crashed when Im pushed that button at 60mph 😂

@andrewj1680 said in Any ideas how i can run my ypvs without a battery:

@rogering according to the wire diagram on the 3 wire servo there should be black and yellow to cdi unit so this would be a live, a black should be earth put a fuse and then looks like brown is a remote earth

brown will be live
on yam wiring black is earth brown live