@NINJA get ya! Thanks for help mate sorry to keep asking same question! Ill bite the bullet and see how she goes!

@mhbikesnbits Have woeful brakes then.

300mm dtx rotor and wr 426 twin piston nissin caliper and master cylinder works great on my DT. Had to make a bracket of course.

@conmador Those dimensions should be correct, it's a custom part you will have to make.

@Bananper Check all your lines and look for evidence of a leak, if it isn't from your master cylinder or hydraulic lines then dismount your brake caliper and check it over.

@finnerz89 @Calum it's not possible to get the other part (not sure what it's called) off the slider, tried knocking it off with a hammer but it really won't come loose... Never experienced something like this. I don't really want to risk breaking the part of while knocking it off before i know of a caliper that's available

DT125R RE X WR125R/X DT200R/3ET WR200R/4BF-3XP All the same Rear Disc pattern.

@irongamer727 Rude not too!!! :thumbs_up_light_skin_tone:

@ninja hell no

I found that buying decent pads on my bike made one of the biggest differences to my riding, not only is it safer, it's actually faster. You can brake later than the competition, and a lightweight small cc bike, that's how you keep up with the big boys!

@calum that’s what I usually do but my clamps missing I’m getting there though

It could be the carrier, either way get it cheap and it's a cheap fix regardless.

@irongamer727 it's all experience mate

I've got wezmoto too. Recommend them to anyone

I use the cheap ebay cnc shortys on all my bikes. My dt125, wr250r, xt550 and xt600 all have the same type levers. Some slightly modified. So if its about the same type/shape, it should fit.

@calum OK G2K. :thumbsup_tone1:

Photobucket is total crap ATM. It's just a data collection tool, I've never had so much junk mail since I opened a PB account!!!

Yeah, I did exactly the same... I did not change the piston, I just used light sandpaper to take all shit away... Then I reassemble all togeteher with new rubber parts and thought it would be an easy job to put new pads while I have it in my hand But by doing you will learn

@CYBER-NINJA cheers mate